Metal Stamping Presses

Metal Stamping Presses

AIDA Presses By Press Type A list of AIDA presses by model type
[More about Presses By Type]

AIDA Presses Alphabetical List An alphabetical list of AIDA presses, both current (modern) and discontinued (legacy).
[More about Alphabetical Press List]

In Stock and Used Stamping Presses Quick delivery, in stock, and quality used presses from AIDA
[More about In Stock and Used Stamping Presses]

AIDA NC1-D Gap Frame Servo PressServo Presses, Gap Frame & Straightside A list of servo presses, both Gap Frame and Straightside, available from AIDA
[More about Servo Presses]

AIDA NC1-D Gap Frame Servo PressAIDA ServoPro Direct Drive AIDA's revolutionary servo press system, ServoPro, available in many models and capacities up to 3000 tons.
[More about AIDA ServoPro]

AIDA NC2 Mechanical Gap Frame PressGap Frame Mechanical Stamping Presses A list of mechanical gap frame (or "C" frame) presses available from AIDA
[More about Gap Frame Mechanical Stamping Presses]

AIDA PMX Progressive Die Straightside PressStraightside Mechanical Stamping Presses A list of mechanical straightside presses available from AIDA
[More about Mechanical Straightside Presses]

AIDA HMX High Speed Straightside PressHigh Speed Stamping Presses A list of High Speed Stamping Presses available from AIDA
[More about High Speed Stamping Presses]

AIDA FMX Cold Forging Straightside PressCold Forging Presses A list of Cold Forging Presses available from AIDA
[More about Cold Forging Presses]

AIDA LF Series Servo Coil FeederPress Automation Feeders & Transfers AIDA offers stamping press automation, including transfers, feeders, destackers, and material handling robots
[More about AIDA Press Automation]

AIDA Press Selector Database AIDA's searchable database of current and legacy (discontinued) model presses
[More about AIDA Press Selector Database]

AIDA Stamping Press Photos & Videos Photos & Videos of AIDA stamping press installations
[More about AIDA Stamping Press Photos & Videos]

Back to Top

Contact AIDA We will reply to you quickly
  Contact Name:
  Company Name:
   State / Country:
  Email:
  Tel:
  Area of Interest:
Please send future emails from AIDA:
Yes No
*Required. For quality and efficiency purposes,   please take care with information accuracy.

*For security purposes, javascript is required to process this form. If you see this message, you have javascript disabled. Please enable javascript in your browser to use our contact form.

If you are unable to enable javascript in your browser, please contact us directly using the contact information located here:
www.aida-global.com/contact.cfm

Thank you for your understanding.

"The NSU's bed size and load capacity made it possible for us to build new stamping dies that eliminate the need for secondary operations."

Brian Boeck
Manufacturing Engineer for Bradley

Bradley Testimonial | PDF

"With the NSU's superior performance we were able to schedule more dies to run across the press than we had originally anticipated."

Marvin Otto
Production Manager, C.H.I.

C.H.I. Testimonial | PDF

"With the [AIDA] gap frame presses, we found we didn't have to restrict ourselves on the width of material we ran."

Rick Baltz
Production Manager for E-lite

E-Lite Testimonial | PDF

"With just one press able to handle the larger dies, we knew if we experienced a breakdown we would be facing a serious work stoppage with downtime of two to three weeks. AIDA's NST solved our capacity issues."

Don Ried
Manufacturing Engineer for Empire

Empire Testimonial | PDF

"We're able to run the smallest possible batches, minimizing working capital, inventory, and floor space requirements while optimizing flexibility, cycle times, and capacity."

Rick Thompson
Senior Director for Flextronics' Juárez Operations

Flextronics Testimonial | PDF

"We selected AIDA's Access control to work with the PMX. AIDA customized our control layout to meet the special needs we had in the pressroom."

Lawrence Toboyek
Manager of Maintenance and Tooling for Greenheck

Greenheck Testimonial | PDF

"When we began running production on the PMX, we saw production rates we had never seen before."

Tom Kacmarcik
President of Manufacturing of Kapco

Kapco Testimonial | PDF

"Not only are we supplying our customers parts with greater efficiency, the ability to use nontraditional die technology gives us, our customers, and our prospective customers more manufacturing options."

Gary Wenzel
Vice President of Manufacturing for Luitink

Luitink Testimonial | PDF

"The TMX literally allowed Midwest to move into the electronic age."

Ken Freeman
Corporation Tooling Manager for Midwest Stamping

Midwest Testimonial | PDF

"The [AIDA] lines run 24 hours a day, five and a half days a week, and we've experienced no downtime with the presses."

John Olson
Senior Automation Engineer for
Milwaukee Electric Tool Corporation

Milwaukee Testimonial | PDF

"We wanted a system that could not only produce the part but support our just-in-time initiatives by helping us to further reduce inventory, lead times and the cost and maintenance associated with progressive dies."

Richard Engasser
Production Manager, Newman Technologies S.C.

Newman Testimonial | PDF

"We wanted to create a state-of-the-art stamping shop that would meet our current needs and possess the capability to take us a step further,"

Corey Suthers
President of Norlen, Incorporated

Norlen Testimonial | PDF

"We needed a press that could produce a variety of stampings ranging from high volume, thick progressive die parts to large, lower volume, highly cosmetic pieces."

Jason Nelson
Manufacturing Engineer for Polaris

Polaris Testimonial | PDF

"Since we've had these presses, our improvement in uptime has been dramatic. And for a job shop, that's the bottom line, because downtime isn't an option."

Trent Jensen
General Manager For Tenere Dresser Division

Tenere Testimonial | PDF

"We could have considered a conventional press line for this job but the manufacturing cell we created by selecting a transfer line of four AIDA 250-ton gap presses armed with ServoPro allowed us to invest in our future."

Tom Ward
Vice President, Ward Manufacturing Company

Ward MFG Testimonial | PDF