AIDA Presses | Cold Forging Presses | CF1

Cold Forging Press | Straightside | 220 - 630 Metric Tons Capacity

Photo of the AIDA CF1 Cold Forging PressHigh Forming Forces Well Above BDC AIDA's Cold Forging Technologies play important rolls in the automotive and other industrial fields.

The simplified link mechanism of the AIDA CF1 Cold Forging Press provides higher tonnage capacity compared to conventional toggle or crank type presses. This eliminates the necessity of a larger press.

Better material flow, improved part precision, and extended die life are all the results from slower forming speeds.


Features & Benefits Precision Parts Forming, Extended Die Life, Reduced Die Setting Time, and more
[Read More Features and Benefits]

Specifications From 220 to 630 tons capacity
[Read More Specifications]

Photos, Videos, & Articles Photos, Videos, Testimonials, Technical Articles, & AIDA-Tech White Papers
[View More Photos, Videos, & Articles]

Get More Information [Contact AIDA] Contact AIDA and we will respond to you quickly
[Get Information - Contact AIDA]

Back to Top

Features & Benefits

  • Maximum pressure attained at high position of slide stroke
  • Precision forming of parts and long tool life
  • Ample provisions for facilitating production automation
  • Drastically reduced die setting time
  • Superior operability

Back to Top


CF1 Model Specifications (metric)CF1-220CCF1-400SCF1-630S
Tonnage capacitytf220400630
Rated tonnage pointmm71010
Slide stroke lengthmm160400400
Die heightmm420900900
Slide adjustmentmm305050
Slide area (L.R. x F.B.)mm700 x 500750 x 750800 x 800
Bolster area (L.R. x F.B.)mm1050 x 600750 x 750800 x 800
Frame gapmm280--
Work heightmm950700700
Main motorkWVS22VS37 x 2SCR75
Knockout capacitytf103240
Knockout strokemm70150150
Knockout pin liftertf111
Diameter of knockout pinmmØ50 x 3Ø60Ø60

Back to Top

Photos, Videos, & Articles

Videos | Images | Testimonials | AIDA-Tech White Papers | Technical Articles

Videos Click Image to View Video

Cold Forging PressCold Forging Press, AIDA K1, video thumbnail

Back to Top

Images Click Image to View Larger Size No Images for this Press Available at this Time | View AIDA Press Photo Gallery

Back to Top


Back to Top

AIDA-Tech White Papers

Back to Top

Technical Articles

Back to Top

Contact AIDA We will reply to you quickly
  Contact Name:
  Company Name:
   State / Country:
  Area of Interest:
Please send future emails from AIDA:
Yes No
*Required. For quality and efficiency purposes,   please take care with information accuracy.

*For security purposes, javascript is required to process this form. If you see this message, you have javascript disabled. Please enable javascript in your browser to use our contact form.

If you are unable to enable javascript in your browser, please contact us directly using the contact information located here:

Thank you for your understanding.

"The NSU's bed size and load capacity made it possible for us to build new stamping dies that eliminate the need for secondary operations."

Brian Boeck
Manufacturing Engineer for Bradley

Bradley Testimonial | PDF

"With the NSU's superior performance we were able to schedule more dies to run across the press than we had originally anticipated."

Marvin Otto
Production Manager, C.H.I.

C.H.I. Testimonial | PDF

"With the [AIDA] gap frame presses, we found we didn't have to restrict ourselves on the width of material we ran."

Rick Baltz
Production Manager for E-lite

E-Lite Testimonial | PDF

"With just one press able to handle the larger dies, we knew if we experienced a breakdown we would be facing a serious work stoppage with downtime of two to three weeks. AIDA's NST solved our capacity issues."

Don Ried
Manufacturing Engineer for Empire

Empire Testimonial | PDF

"We're able to run the smallest possible batches, minimizing working capital, inventory, and floor space requirements while optimizing flexibility, cycle times, and capacity."

Rick Thompson
Senior Director for Flextronics' Juárez Operations

Flextronics Testimonial | PDF

"We selected AIDA's Access control to work with the PMX. AIDA customized our control layout to meet the special needs we had in the pressroom."

Lawrence Toboyek
Manager of Maintenance and Tooling for Greenheck

Greenheck Testimonial | PDF

"When we began running production on the PMX, we saw production rates we had never seen before."

Tom Kacmarcik
President of Manufacturing of Kapco

Kapco Testimonial | PDF

"Not only are we supplying our customers parts with greater efficiency, the ability to use nontraditional die technology gives us, our customers, and our prospective customers more manufacturing options."

Gary Wenzel
Vice President of Manufacturing for Luitink

Luitink Testimonial | PDF

"The TMX literally allowed Midwest to move into the electronic age."

Ken Freeman
Corporation Tooling Manager for Midwest Stamping

Midwest Testimonial | PDF

"The [AIDA] lines run 24 hours a day, five and a half days a week, and we've experienced no downtime with the presses."

John Olson
Senior Automation Engineer for
Milwaukee Electric Tool Corporation

Milwaukee Testimonial | PDF

"We wanted a system that could not only produce the part but support our just-in-time initiatives by helping us to further reduce inventory, lead times and the cost and maintenance associated with progressive dies."

Richard Engasser
Production Manager, Newman Technologies S.C.

Newman Testimonial | PDF

"We wanted to create a state-of-the-art stamping shop that would meet our current needs and possess the capability to take us a step further,"

Corey Suthers
President of Norlen, Incorporated

Norlen Testimonial | PDF

"We needed a press that could produce a variety of stampings ranging from high volume, thick progressive die parts to large, lower volume, highly cosmetic pieces."

Jason Nelson
Manufacturing Engineer for Polaris

Polaris Testimonial | PDF

"Since we've had these presses, our improvement in uptime has been dramatic. And for a job shop, that's the bottom line, because downtime isn't an option."

Trent Jensen
General Manager For Tenere Dresser Division

Tenere Testimonial | PDF

"We could have considered a conventional press line for this job but the manufacturing cell we created by selecting a transfer line of four AIDA 250-ton gap presses armed with AIDA Servo Technology allowed us to invest in our future."

Tom Ward
Vice President, Ward Manufacturing Company

Ward MFG Testimonial | PDF