AIDA Company | News & Events

AIDA News & Events

Servo Presses Demonstrate In-Die Tapping, HSLA Blanking, Productivity Improvements at Fabtech Las Vegas 2016, AIDA-America Booth C17024 AIDA-America, Dayton, OH, USA, will demonstrate industry leading servo press technology in booth C17024 at Fabtech Las Vegas 2016.

Two AIDA DSF Series Servo Presses will be on display, powered-up and stamping parts at this year's Fabtech event taking place November 16 through 18 at the Las Vegas Convention Center.

AIDA DSF Series Servo Presses On Display at Fabtech 2016

The first, an AIDA DSF-C1-1500, 150-ton, gap frame servo press, will be blanking HSLA material and demonstrating AIDA's Silent Blanking motion profile which can only be achieved using a servo press. The demonstration will also highlight the versatility of AIDA servo presses and how they can improve virtually any stamping operation. These improvements include increased productivity, improved part quality, increased die life, reduced maintenance, and many more important issues for those in the stamping industry.

The second AIDA DSF Series press on display, a DSF-N2-3000, 300-ton, two-point unitized frame servo press, will be part of a full production line. AIDA-America has partnered with Dallas Industries (complete feedline), Pax Products (part/scrap removal & lubrication system), Heidtman Steel (hot rolled mild steel) and Automated Tapping Systems (servo-driven in-die tapping) to showcase this complete production line featuring a progressive die with a horizontal in-die tapping system.

AIDA-America associates will be available to share examples of production optimization driven by AIDA DSF Servo presses used in the stamping industry and discuss how these infinitely programmable presses can help maximize stampers' productivity and profit in the press room.Learn More About AIDA-America at Fabtech 2016

AIDA-America, Qualtek Manufacturing Inc. Announce Leadership Changes 11-1-16, AIDA-America, Dayton, OH, USA and Qualtek Manufacturing Inc., Colorado Springs, CO, USA are jointly announcing leadership changes within their respective organizations.

Troy Roberts, current President/COO of AIDA-America will be transitioning to the position of CEO at Qualtek Manufacturing, effective December 1st, 2016. Mr. Roberts' decision to leave AIDA-America was prompted by the opportunity at Qualtek and his strong desire to be closer to family and the great outdoors. While Troy will be missed, he is leaving AIDA-America as the North American market leader of metalforming suppliers and in the very capable hands of the 200 associates that he has worked with over the past 21 years. In his new role at Qualtek, Troy will lead Qualtek's team in achieving its goal to become the premier stamping, heat treating and metal finishing supplier to aerospace, medical device and automotive manufacturers.

Pat Ambuske, AIDA-America's current Vice President of Operations, will succeed Mr. Roberts as President & CEO, effective December 1st, 2016. Mr. Ambuske joined AIDA-America in 2001 and has held various leadership roles over planning, engineering, purchasing and manufacturing functions during his 15 year tenure at the company. Pat has played a key role in much of AIDA-America's recent success. With Pat's guidance, the local engineering team has experienced significant growth. He has helped sharpen their focus on solutions designed for North American stampers, specifically applying AIDA servo technology to a wide range of products. Significant plant and manufacturing operations expansions have taken place under Pat's leadership, positioning AIDA-America as the largest and most advanced manufacturer of stampingpresses in North America. Pat will continue to build on AIDA's success as the leader in servo press technology. As a team, AIDA-America will continue to push forward the policies of constant product improvement and deep partnership with customers to create the most effective production systems. AIDA-America will also maintain the standard of excellence in customer service and on-going support.

Both Troy Roberts and Pat Ambuske will be attending the Fabtech 2016 Las Vegas tradeshow, taking place November 16th through 18th at the Las Vegas Convention Center, and will be greeting visitors, customers, industry professionals and all others in AIDA-America's booth, C17024. They encourage all interested parties to visit the booth to personally discuss this exciting new chapter for both Qualtek and AIDA-America.

AIDA Europe Opens New European Technology Center in Weingarten, Germany AIDA ENGINEERING Ltd., world leader in SERVO technology for metal forming equipment, will open their new European Technology Center in Weingarten/Germany on 1st of August 2016.

The mayor of Weingarten, Mr. Markus Ewald (left), President of AIDA Engineering Ltd. Mr. Kimikazu Aida and Vice President Sales AIDA EUROPE Mr. Klaus Rothenhagen (right)
The mayor of Weingarten, Mr. Markus Ewald (left), President of AIDA Engineering Ltd. Mr. Kimikazu Aida and Vice President Sales AIDA EUROPE Mr. Klaus Rothenhagen (right)

AIDA EUROPE GmbH will have Sales & Engineering functions as well as Project Management, Purchasing and other activities. Combined with the already existing service operations, AIDA will be serving its northern, central and eastern European customers more closely and effectively and will strengthen its position as a leading supplier of Press Forming Systems.

AIDA EUROPE GmbH new office building in Weingarten, Germany
AIDA EUROPE GmbH new office building in Weingarten, Germany

Current functions and manufacturing for Europe will remain in Italy and together with AIDA's other manufacturing facilities in Japan, China, Malaysia and the USA, it will produce Tandem Lines, Transfer Presses and Blanking Lines of all sizes and configurations.

Mr. Aida stated, "The Bodensee-Oberschwaben region is one of the most innovative regions in Germany and many of our customers and suppliers are located here. Therefore, we decided to open our office here in Weingarten."

Klaus Rothenhagen, Vice President Sales of AIDA EUROPE, added "By opening our new office in Weingarten, AIDA can better serve our German and European customers more efficiently. By strengthening and expanding the service department, AIDA can ensure professional support for our customers."

Markus Ewald, the mayor of Weingarten, welcomed Mr. Aida last week and congratulated him for AIDA's decision to locate the new European Tech Center in Weingarten.

Initially, AIDA will increase the number of employees in Germany up to 50. In Europe, AIDA has more than 400 associates and around 1,800 globally.
The management team will consist of Hans Kurt (Administration), Klaus Rothenhagen (Sales) and Thomas Spiesshofer (Technology and Engineering). Thomas Spiesshofer will join AIDA EUROPE GmbH in 2017.

Among the various forming systems for processing metal, press metalforming remains the technological leader in providing high-quality and high-volume production of metal parts with outstanding efficiency. Since its founding in 1917, AIDA ENGINEERING Ltd., as a forming system builder, has promoted technical innovation in industrial products by continuously rising to the challenge of developing new technologies. As AIDA approaches the 100th anniversary of its founding, market globalization and growing environmental and energy concerns are giving rise to new demands on industrial manufacturing. AIDA is creating the high value-added forming systems that respond to these demands as it aims to strengthen its presence in the global market and establish itself as a top global brand in forming technology.
PDF News Release

AIDA-America Launches New YouTube Channel AIDA-America's New YouTube Channel has added 9 Videos. View them now and subscribe to the channel to keep up-to-date as new videos are added.

The channel includes footage from AIDA-America's advanced press manufacturing facility in Dayton, OH, large servo presses (1,500, 2,000 & 3,000 ton models), presses in production at our equipment users' facilities and more.

AIDA-America on YouTube

ISMR Visits AIDA EuropeInternational Sheet Metal Review recently visited AIDA Europe's Open House in Italy and met its President, Peter Maddix.

Please read the interesting article about AIDA Europe here below.
Article PDF
Please click on the following link to watch the video of the Open House:
AIDA Europe Open House

OPEN HOUSE – AIDA Europe – 20 / 21 April 2016 A unique opportunity to visit the AIDA Europe plant and discover the Servo technology of AIDA

Choose to spend one day with us. Take part in the conferences about Servo Presses, Successful Forming of High Strength Steels and an exclusive presentation of Precision Forming Technology with the unique AIDA ULX Press.
During the event we will run a Demo on a Servo press - model DSF-M2-6300-425-150 with transfer, which is part of the complete high performance product portfolio of the company.
Stay in contact with us and find out more about our event at:
AIDA Europe Open House 2016

AIDA DSF-C1-1500 Servo Press at Fabtech Canada 2016AIDA-America, in partnership with Veugen Integrated Technologies, will display a DSF-C1-1500, 150 Ton Gap Frame Servo Press at Fabtech Canada 2015. The display will include an HSLA blanking operation and will show the benefits that can be gained from the infinitely programmable control of the AIDA DSF Servo Press.
The show will take place at the Toronto Congress Centre from March 22nd - 24th, 2016.
More Information about Fabtech Canada 2016

AIDA at Metalworking International Exhibition 2015AIDA will be at the Metalworking International Exhibition April 7th-10th, 2015 in Minsk, Belarus. Please visit stand F8 to learn how AIDA, the leader in servo press technology, can greatly improve the productivity of your stamping operations.

AIDA has been the first company in the world to develop and market direct-drive servo presses, delivering to date over one thousand units worldwide. AIDA Direct Drive Servo Former (DSF) presses are the revolutionary forming systems for the 21st Century. DSF presses are attracting more and more customers who aim at boosting their productivity andincreasing their competitive advantages in the global metalforming industry, while achieving sustainable business development.

Please confirm your visit by phone: +39 030 9590182 / 9590284 or email: info@aida-europe.com
View More Information

AIDA at EuroBlech 2014 At EuroBLECH 2014, AIDA is proud to exhibit one of its state-of-the-art DSF-M2 servo presses, which is part of the complete high performance product portfolio of the company.

EINLADUNG ZUR PRESSEKONFERENZ EUROBLECH 2014
"AIDA – Umformtechnik für die Zukunft- Technologie, Trends und Fakten"
Wir laden Sie herzlich zur Pressekonferenz anlässlich der EUROBLECH 2014 in Hannover ein.

Ort: Messegelände, Convention Center CC, Raum 17
Termin: Mittwoch 22. Oktober 2014
Beginn: 13:30
Ende: 15:30

Sprecher werden Herr KIMIKAZU AIDA (CEO AIDA ENGINEERING), Peter Maddix (President AIDA EUROPE) und Herr KLAUS ROTHENHAGEN (VP SALES AIDA EUROPE) sein.

Bitte melden Sie sich per Email unter krothenhagen@aida-europe.com an. Wir freuen uns, sie auf unserer Pressekonferenz begrüßen zu dürfen.

INVITATION FOR PRESS CONFERENCE EUROBLECH SHOW 2014

"AIDA – Metalforming for the Future, Technology, Trends and Facts"

We like to invite you to our press conference during the EUROBLECH SHOW 2014 in Hanover.

Location: Fair ground, Convention Center CC, Room 17
Date: Wednesday 22. October 2014
Start: 13:30
End: 15:30

The press conference will be held by Mr. KIMIKAZU AIDA (CEO AIDA ENGINEERING), Peter Maddix (President AIDA EUROPE) and Mr. KLAUS ROTHENHAGEN (VP SALES AIDA EUROPE)

AIDA-America at Fabtech 2014AIDA-America, booth #B1601, will have (2) Direct Drive Servo Formers (DSF Series) on display at Fabtech 2014, both a part of AIDA's complete line of servo presses ranging from 80 to 3,000 tons. Each DSF Series Servo Press displayed will feature live demonstrations and parts production. An AIDA DSF-N2-3000, 300 ton, straightside servo press, recently purchased by, and courtesy of National Frame Rail, will be producing parts from 4.5mm thick, 120mm wide material in a progressive die operation. Also displayed, an HSLA blanking operation will highlight the drastic reduction in reverse tonnage via Silent Blanking from an AIDA DSF-C1-1500, 150 ton press. Please visit #B1601 and learn how AIDA, the leader in servo press technology, can greatly improve the productivity of your stamping operations.

AIDA-America at Fabtech 2013 AIDA-America, Dayton, OH, USA, booth #S4625, will have (3) Direct Drive Servo Formers (DSF Series) on display at this year's Fabtech Exhibition in Chicago, IL. Each of the AIDA DSF Series Servo Presses will feature a different demonstration including tooling and parts production. One of the demonstrations will feature an AIDA DSF-N2-3000, 300 ton, straightside servo press, recently purchased by, and courtesy of Jagemann Stamping, Manitowoc, WI . In cooperation with Formtek/CWP and Pax Products, with material provided by Heidtman Steel Products, the DSF-N2-3000 Servo Press will be producing a pipe flange part from 4.5mm thick, 120mm wide material via a progressive die operation. Additionally, AIDA, in cooperation with Hyson Products and making use of their servo die cushion, will display the advantages of using a DSF Series Servo press for a difficult drawing application. AIDA-America will also display an HSLA blanking operation highlighting the ability of a DSF Series Servo press to dramatically reduce reverse tonnage. Please visit AIDA-America's booth and speak with one of our knowledgeable associates regarding how AIDA DSF Series Servo Presses can greatly improve the productivity of your stamping operations.

Invitation for Press Conference During EuroBlech 2012 Show in Hanover AIDA – Metalforming for the Future: Technology, Trends and Facts We would like to invite you to our press conference during the EUROBLECH 2012 SHOW in Hanover.

Location: Fair ground, Convention Center, Room 11
Date: Wednesday, 24. October 2012
Start: 09:00
End: 11:00

The press conference will be held by Mr. KIMIKAZU AIDA (CEO AIDA ENGINEERING) and Mr. KLAUS ROTHENHAGEN (VP SALES AIDA EUROPE)

Please register by Email at krothenhagen@aida-europe.com

We are looking forward to see you at our press conference in Hanover

EINLADUNG ZUR PRESSEKONFERENZ ANLäSSLICH DER EUROBLECH 2012 IN HANNOVER AIDA – Umformtechnik für die Zukunft: Technologie, Trends und Fakten Wir laden Sie herzlich zur Pressekonferenz anlässlich der EUROBLECH 2012 in Hannover ein.

Ort: Messegelände, Tagungscenter, Raum 11
Termin: Mittwoch 24. Oktober 2012
Beginn: 09:00
Ende: 11:00

Sprecher werden Herr KIMIKAZU AIDA (CEO AIDA ENGINEERING) und Herr KLAUS ROTHENHAGEN (VP SALES AIDA EUROPE) sein.

Bitte melden Sie sich mit per Email unter krothenhagen@aida-europe.com an.

Wir freuen uns, sie auf unserer Pressekonferenz begrüßen zu dürfen.

Watch a Servo Press Run in Pendulum Mode, to Boost SPM by 30 Percent Batesville Tool & Die recently invested in a new AIDA 800-ton two-point servo-drive press and a new addition to its 255,000-sq.-ft. plant. Metalforming Magazine recently visited BTD to report on its new servo-drive press, and will feature the story in the September issue.

In the meantime, they've posted a 2-min, video to the Multimedia Center of metalformingmagazine.com, showing the servo press deep-drawing 0.085-in. cold-rolled steel. With the press operating in pendulum mode, productivity rises by 30 percent compared to running the job on a standard mechanical press.

View the Video | www.metalformingmagazine.com/multimedia/

AIDA-America Hosts Servo Press Symposium / Open House Dayton, Ohio, 6/25/2012 - On June 13th and 14th AIDA-America hosted its latest Servo Press Symposium and Open House.

Nearly 120 attendees, representing close to 60 companies, were on hand to take part in technical seminars as well as have a first-hand experience with multiple demonstrations of AIDA Direct Drive Servo Formers(DSF Series). Visitors to AIDA-America's facility viewed presentations of HSLA blanking, part, production and process improvements and a sampling of AIDA's Servo Press range - a 110 ton, two-point straightside DSF-N2-1100, a 200 ton, single-point gap frame DSF-C1-2000 and a 630 ton, straightside DSF-M2-6300 (MCX Series) were all operational on the shop floor.

With the elevated interest and excellent attendance to the event, it is quite evident that Servo Press Technology is an important topic for many throughout the metal stamping and metalforming industries. AIDA continues to support the need for this technology in these industries by offering its DSF Series Servo Presses in capacities of 80 - 3,500 tons.

AIDA-America Expands Distribution Network for Michigan, AIDA Group opens New Offices in Russia & Morocco [Read More] AIDA-America has further strengthened its North American sales network by adding Midwest Press and Automation as the exclusive distributor for Michigan.

Midwest Press and Automation
2904 Snow Rd.
Lansing, MI 48917
Tel: 517-731-0073
Fax :517-622-8231
E-mail: sales@mpallp.com
Website: www.midwestpressandautomation.com

The AIDA Group has recently opened new offices in Morocco and Russia, enabling quick and local support to customers in these regions.

AIDA Maroc Sarl
Bureau 210-211,
2ème étage Lot 43A
Zone Franche d'Exportaion 90 100 - Tanger Maroc
Tel: (212) 0 539395325
Fax: (212) 0 539395325

OOO AIDA (Russia)
Frunze Street, 14B office 230
445037 Togliatti, Russia
Tel: (7) 8482 270376
Fax: (7) 8482 270376

AIDA is committed to being readily accessible to customers via our extensive distributor and direct sales network, as well as, service and support locations throughout the world.
Read More | AIDA Group Contact Information

AIDA-America & AIDA-Europe Exhibition Schedule [Read More] The AIDA-America and AIDA-Europe exhibition schedules have been updated on the website. The exibitions include:
MACH 2012
Fabtech / Metalform Mexico 2012
Metalloobrabotka 2012
Euroblech 2012
Fabtech 2012 (Las Vegas)
Read More | AIDA-America & AIDA-Europe Exhibition Schedule

AIDA-Europe Delivers the World's Largest Servo Transfer Press to a North American Customer [Read More] Calolziocorte, Italy 10/25/11 - AIDA-Europe, world leader in Servo Press technology for metal forming equipment, having delivered over 1000 pieces of equipment, in August supplied the world's largest Servo Transfer Press to a North American customer. Klaus Rothenhagen, Vice President of AIDA-Europe, said that this system, which consists of a de-stacker and Servo Transfer Press, is currently unique in the world of forming technology.
Read More | World's Largest Servo Transfer Press

AIDA Introduces New MCX Series Straightside Presses [Read More] Dayton, OH 8/15/2011 - The AIDA Global Group introduces its new line of straightside stamping presses, the MCX Series. The MCX, modular configuration series presses, offer stampers a wide array of press configurations and specifications. Options include: single or double gear, 1/4 or 1/2 inch rating points, five drive options, including mechanical or servo, a wide variety of stroke lengths and die height choices, and capacities ranging from 315 tons through 1250 tons.
Visit www.aida-global.com/mcx to learn more about the MCX series of straightside presses and how they can help maximize your pressroom's flexibility, versatility, production, and profit.

AIDA to Exhibit Multiple Servo Presses at Fabtech 2011 Dayton, OH, 8/15/2011 - AIDA-America Corp., Dayton, OH, Booth 3125, South Building, will be exhibiting and demonstrating two servo presses from its extensive range of metalforming solutions. The first press on display will be a NS2-1600(D), 160 ton capacity, straightside servo press. This press will be part of a completely functional line, stamping parts and presented at the show in cooperation with Formtek/CWP, Dayton Progress, AG Tool &Die, and Anchor Danly. The press is provided courtesy of Royal Die & Stamping. The second press in AIDA's booth will be a NC1-1100(D), 110 ton, gap frame servo press, demonstrating the servo presses' unique ability to reduce reverse tonnage and its ease of operation. Both AIDA servo presses will show how AIDA brings maximum flexibility to your pressroom through an infinite number of freely programmable, application optimized, speed, velocity and dwell profiles. Maximized flexibility means maximized productionand maximized profit for your stamping operation.

Donation to Support Victims and Areas Affected by the Earthquake in JapanSagamihara, Japan, 3/18/2011 - The AIDA Group would like to express its deepest condolences for all those who lost their lives as a result of the earthquake which occurred on March 11, 2011 in the Pacific Ocean offshore the Tohoku district of Japan. We would also like to express our sincerest sympathies to the many people who have been affected by this natural disaster. We decided to immediately donate 10 million yen via the Japanese Red Cross Society to assist those who have been affected by this disaster and to aid in the recovery efforts in the affected areas. We sincerely hope to see a swift recovery in the affected areas and the AIDA Group will continue to do what it can to assist in these recovery efforts.

High-Strength Steel Forming for Producing Lighter Automobiles [Read More] Sagamihara, Japan, 10/19/2010 - The forming system we are announcing here uses a newly-developed dedicated high-strength steel forming press at the first forming stage where the shape of the 100 kg high-strength steel is set, thereby achieving powerful and accurate forming that was impossible using conventional methods. The second and subsequent stages utilize AIDA's unique high-speed transfer technology to effectively leverage the existing equipment to enable efficient production. This new system is leading the way to a new chapter in high-strength steel metalforming history.
Read More | High Strength Steel Forming System

AIDA-America to Exhibit at Fabtech 2010 Dayton, Ohio, 8/26/2010 - AIDA-America Corp., Dayton, OH will show you how to "Program Your Profit", using AIDA's ServoPro technology. Servo driven stamping presses are available from AIDA in capacities ranging from 80 to 3000 tons, and in a wide variety of model types. The in-booth demonstration at this year's Fabtech Exhibition in Atlanta Georgia, of AIDA's NC1-1500(D), 150 ton gap frame servo press, will display completely programmable stroke, speed, and motion profiles possible with ServoPro. Visit AIDA at booth 1505 and learn how optimized production equals optimized profits with AIDA ServoPro.
More about Fabtech 2010 Register to attend Fabtech for FREE More about AIDA ServoPro Servo Press Technology

AIDA-America Expands Distribution Network for Tennessee Dayton, Ohio, 5/13/2010 - AIDA-America has further strengthened its North American sales network by adding Productive Stamping Solutions Inc. as the exclusive distributor for Tennessee. AIDA is committed to being readily accessible to customers via our extensive distributor and direct sales network, as well as, service and support locations throughout the world.
For more information about AIDA-America's knowledgeable sales contacts, visit:
AIDA Sales | www.aida-america.com/sales

AIDA-America Expands Distribution Network for Canada Dayton, Ohio, 4/14/2010 - AIDA-America has further strengthened its North American sales network by adding SP Consulting as the exclusive distributor for Ontario and Quebec, Canada. AIDA is committed to being readily accessible to customers via our extensive distributor and direct sales network, as well as, service and support locations throughout the world.
For more information about AIDA-America's knowledgeable sales contacts, visit:
AIDA Sales | www.aida-america.com/sales

AIDA Produces "World's Fastest Servo Press Line" [Read More] Sagamihara, Japan, 12/14/2009 - This is to announce that AIDA's large servo press line that was jointly developed with Honda Engineering Co., Ltd. and Honda Motor Co., Ltd. was the recipient of the Materials Process Technology (Sokeizai) Center's 25th Annual President's Industry Technology Award for 2009.
View Photo | World's Fastest Servo Press Line Read More | World's Fastest Servo Press Line

AIDA-America Expands Distributor Network Dayton, Ohio, 12/21/2009 - AIDA-America has added PTW Sales, LLC as its exclusive distributor for Ohio, AMP Machinery Systems Inc for Northern Illinois, and M-Tech for Alabama and Mississippi. These additions further strengthen AIDA's North American sales network. AIDA's commitment to being readily accessible to customers is evident in its extensive distributor and direct sales network, as well as, service and support locations throughout the world.
For more information about AIDA-America's knowledgeable sales contacts, visit:
AIDA Sales | www.aida-america.com/sales

AIDA Launches New ULX-D Precision Servo Press [Read More] Dayton, Ohio, 11/3/2009 - AIDA is proud to announce the launch of a new servo press version of its ULX series precision metalforming press, the ULX-D. The ULX-D precision servo press series is a completely new and innovative metal stamping press that combines the award winning features of the ULX Series (2004 "Ten Greatest Innovations Prize" - Daily Industrial Press), with the highly celebrated AIDA ServoPro system (2002 "10 Greatest Innovations Prize", 2004 "Japan Brand Prize", 2009 "10 Greatest Innovations Prize" - Daily Industrial Press). AIDA ServoPro, with its unique high-torque/low RPM servo motor design, offers completely programmable stroke and velocity profiles and a direct drive system.
View Photo | AIDA ULX-D Precision Servo Press More Information | ULX-D Precision Servo Press

Back to Top

Upcoming Tradeshows

EuroBlech 2014 October 21 - 25, Hanover, Germany EuroBlech 2014
October 21 - 25, 2014
Exhibition Grounds
Hanover, Germany
Visit AIDA, Stand D24, Hall 27
Show Information | www.euroblech.com

Fabtech 2014 November 11 - 13, Atlanta, Georgia Fabtech 2014
November 11 - 13, 2014
Georgia World Congress Center
Atlanta, GA USA
Visit AIDA, booth B1601
Show Registration | http://tinyurl.com/prkdfpl

Contact AIDA We will reply to you quickly
  Contact Name:
  Company Name:
   State / Country:
  Email:
  Tel:
  Area of Interest:
Please send future emails from AIDA:
Yes No
*Required. For quality and efficiency purposes,   please take care with information accuracy.

*For security purposes, javascript is required to process this form. If you see this message, you have javascript disabled. Please enable javascript in your browser to use our contact form.

If you are unable to enable javascript in your browser, please contact us directly using the contact information located here:
www.aida-global.com/contact.cfm

Thank you for your understanding.

"The NSU's bed size and load capacity made it possible for us to build new stamping dies that eliminate the need for secondary operations."

Brian Boeck
Manufacturing Engineer for Bradley

Bradley Testimonial | PDF

"With the NSU's superior performance we were able to schedule more dies to run across the press than we had originally anticipated."

Marvin Otto
Production Manager, C.H.I.

C.H.I. Testimonial | PDF

"With the [AIDA] gap frame presses, we found we didn't have to restrict ourselves on the width of material we ran."

Rick Baltz
Production Manager for E-lite

E-Lite Testimonial | PDF

"With just one press able to handle the larger dies, we knew if we experienced a breakdown we would be facing a serious work stoppage with downtime of two to three weeks. AIDA's NST solved our capacity issues."

Don Ried
Manufacturing Engineer for Empire

Empire Testimonial | PDF

"We're able to run the smallest possible batches, minimizing working capital, inventory, and floor space requirements while optimizing flexibility, cycle times, and capacity."

Rick Thompson
Senior Director for Flextronics' Juárez Operations

Flextronics Testimonial | PDF

"We selected AIDA's Access control to work with the PMX. AIDA customized our control layout to meet the special needs we had in the pressroom."

Lawrence Toboyek
Manager of Maintenance and Tooling for Greenheck

Greenheck Testimonial | PDF

"When we began running production on the PMX, we saw production rates we had never seen before."

Tom Kacmarcik
President of Manufacturing of Kapco

Kapco Testimonial | PDF

"Not only are we supplying our customers parts with greater efficiency, the ability to use nontraditional die technology gives us, our customers, and our prospective customers more manufacturing options."

Gary Wenzel
Vice President of Manufacturing for Luitink

Luitink Testimonial | PDF

"The TMX literally allowed Midwest to move into the electronic age."

Ken Freeman
Corporation Tooling Manager for Midwest Stamping

Midwest Testimonial | PDF

"The [AIDA] lines run 24 hours a day, five and a half days a week, and we've experienced no downtime with the presses."

John Olson
Senior Automation Engineer for
Milwaukee Electric Tool Corporation

Milwaukee Testimonial | PDF

"We wanted a system that could not only produce the part but support our just-in-time initiatives by helping us to further reduce inventory, lead times and the cost and maintenance associated with progressive dies."

Richard Engasser
Production Manager, Newman Technologies S.C.

Newman Testimonial | PDF

"We wanted to create a state-of-the-art stamping shop that would meet our current needs and possess the capability to take us a step further,"

Corey Suthers
President of Norlen, Incorporated

Norlen Testimonial | PDF

"We needed a press that could produce a variety of stampings ranging from high volume, thick progressive die parts to large, lower volume, highly cosmetic pieces."

Jason Nelson
Manufacturing Engineer for Polaris

Polaris Testimonial | PDF

"Since we've had these presses, our improvement in uptime has been dramatic. And for a job shop, that's the bottom line, because downtime isn't an option."

Trent Jensen
General Manager For Tenere Dresser Division

Tenere Testimonial | PDF

"We could have considered a conventional press line for this job but the manufacturing cell we created by selecting a transfer line of four AIDA 250-ton gap presses armed with AIDA Servo Technology allowed us to invest in our future."

Tom Ward
Vice President, Ward Manufacturing Company

Ward MFG Testimonial | PDF