Cold Forging Transfer Press CFT From 400 - 1,200 Tons
Press Information
Press Information & Overview
Cold Forging Transfer Press, CFT Overview
The AIDA CFT, Cold Forging Transfer Press, employs a unique transfer mechanism. Because it is completely different from transfer processing of sheet metals, the timing of punch up-stroking, knockout stroking, and transfer motion for automating cold forging processing is a critical problem to be solved. Timing adjustment of the lower knockout, however, makes transfer processing possible. Two-dimensional, three-dimensional, and grip transfer mechanisms are optionally available.
Request More InformationPress Features
AIDA CFT Cold Forging Transfer Press Features
- Consistent product precision with uniform quality
- Material flow is smoother by continuous processing and strength is improved
- Storage space for semi-finished products is reduced
- Safety is enhanced because automation and setup time is drastically shortened
- Easy die changing thanks to die lifting equipment
- Improved product accuracy and longer die life are results of minimal slide inclination caused by eccentric load
Press Specifications
CFT Cold Forging Transfer Press Specifications
| 400 Ton | 600 Ton |
| 800 Ton | 1000 Ton |
| 1,200 Ton | |
| 400 - 1,200 Ton |
CFT-4000, 400 Ton Cold Forging Transfer Press Specifications
| CFT-4000 MODELS | ||
| Press Technical Data | Unit | CFT-4000 |
| Capacity | kN | 4000 |
| U.S. Ton | 440 | |
| Stroke Length | mm | 250 |
| in. | 9.84 | |
| Strokes per Minute | spm | 30~45 |
| Die Height | mm | 600 |
| in. | 23.62 | |
| Slide Area (LR x FB) | mm | 1200x750 |
| in. | 47.24x29.53 | |
| Bolster Area (LR x FB) | mm | 1200x900 |
| in. | 47.24x35.43 | |
| Rated Tonnage Point | mm | 7 |
| in. | 0.28 | |
| Bed Knockout Capacity | tons | 20 (10 each) |
| Number of Stages | 3 | |
CFT-6000, 600 Ton Cold Forging Transfer Press Specifications
| CFT-6000 MODELS | ||
| Press Technical Data | Unit | CFT-6000 |
| Capacity | kN | 6000 |
| U.S. Ton | 670 | |
| Stroke Length | mm | 250 |
| in. | 9.84 | |
| Strokes per Minute | spm | 30~45 |
| Die Height | mm | 650 |
| in. | 25.59 | |
| Slide Area (LR x FB) | mm | 1200x750 |
| in. | 47.24x29.53 | |
| Bolster Area (LR x FB) | mm | 1200x900 |
| in. | 47.24x35.43 | |
| Rated Tonnage Point | mm | 7 |
| in. | 0.28 | |
| Bed Knockout Capacity | tons | 30 (15 each) |
| Number of Stages | 3 | |
CFT-8000, 800 Ton Cold Forging Tranfer Press Specifications
| CFT-8000 MODELS | ||
| Press Technical Data | Unit | CFT-8000 |
| Capacity | kN | 8000 |
| U.S. Ton | 900 | |
| Stroke Length | mm | 250 |
| in. | 9.84 | |
| Strokes per Minute | spm | 25~35 |
| Die Height | mm | 650 |
| in. | 25.59 | |
| Slide Area (LR x FB) | mm | 1200x750 |
| in. | 47.24x29.53 | |
| Bolster Area (LR x FB) | mm | 1200x900 |
| in. | 47.24x35.43 | |
| Rated Tonnage Point | mm | 7 |
| in. | 0.28 | |
| Bed Knockout Capacity | tons | 40 (20 each) |
| Number of Stages | 3 | |
CFT-1000, 1,000 Ton Cold Forging Transfer Press Specifications
| CFT-10000 MODELS | ||
| Press Technical Data | Unit | CFT-10000 |
| Capacity | kN | 10000 |
| U.S. Ton | 1120 | |
| Stroke Length | mm | 250 |
| in. | 9.84 | |
| Strokes per Minute | spm | 25~35 |
| Die Height | mm | 650 |
| in. | 25.59 | |
| Slide Area (LR x FB) | mm | 1500x1000 |
| in. | 59.06x39.37 | |
| Bolster Area (LR x FB) | mm | 1500x1100 |
| in. | 59.06x43.31 | |
| Rated Tonnage Point | mm | 7 |
| in. | 0.28 | |
| Bed Knockout Capacity | tons | 50 (25 each) |
| Number of Stages | 3 | |
CFT-12000, 1,200 Ton Cold Forging Transfer Press Specifications
| CFT-12000 MODELS | ||
| Press Technical Data | Unit | CFT-12000 |
| Capacity | kN | 12000 |
| U.S. Ton | 1350 | |
| Stroke Length | mm | 250 |
| in. | 9.84 | |
| Strokes per Minute | spm | 20~30 |
| Die Height | mm | 650 |
| in. | 25.59 | |
| Slide Area (LR x FB) | mm | 1500x1000 |
| in. | 59.06x39.37 | |
| Bolster Area (LR x FB) | mm | 1500x1100 |
| in. | 59.06x43.31 | |
| Rated Tonnage Point | mm | 7 |
| in. | 0.28 | |
| Bed Knockout Capacity | tons | 60 (30 each) |
| Number of Stages | 3 | |
CFT, 400 - 1,200 Ton Cold Forging Transfer Press Specifications
| CFT MODELS | ||||||
| Press Technical Data | Unit | CFT-4000 | CFT-6000 | CFT-8000 | CFT-10000 | CFT-12000 |
| Capacity | kN | 4000 | 6000 | 8000 | 10000 | 12000 |
| U.S. Ton | 640 | 670 | 900 | 1120 | 1350 | |
| Stroke Length | mm | 250 | 250 | 250 | 250 | 250 |
| in. | 9.84 | 9.84 | 9.84 | 9.84 | 9.84 | |
| Strokes per Minute | spm | 30~45 | 30~45 | 25~35 | 25~35 | 20~30 |
| Die Height | mm | 600 | 650 | 650 | 650 | 650 |
| in. | 23.62 | 25.59 | 25.59 | 25.59 | 25.59 | |
| Slide Area (LR x FB) | mm | 1200x750 | 1200x750 | 1200x750 | 1500x1000 | 1500x1000 |
| in. | 47.24x29.53 | 47.24x29.53 | 47.24x29.53 | 59.06x39.37 | 59.06x39.37 | |
| Bolster Area (LR x FB) | mm | 1200x900 | 1200x900 | 1200x900 | 1500x1100 | 1500x1100 |
| in. | 47.24x35.43 | 47.24x35.43 | 47.24x35.43 | 59.06x43.31 | 59.06x43.31 | |
| Rated Tonnage Point | mm | 7 | 7 | 7 | 7 | 7 |
| in. | 0.28 | 0.28 | 0.28 | 0.28 | 0.28 | |
| Bed Knockout Capacity | tons | 20 (10 each) | 30 (15 each) | 40 (20 each) | 50 (25 each) | 60 (30 each) |
| Number of Stages | 3 | 3 | 3 | 3 | 3 | |
Technical Resources
Frequently Asked Questions
- What is HOLP
- Gap Frame Mechanical Press Tandem Lines
- Wet-Type Clutch and Brake
- NC Press Frame Design
- Ball Cup versus Wrist Pin Design
We offer answers for all types of common questions - whether technical in nature or as simple as where to look for career opportunities. Examples of some questions are: What is HOLP? Where is closest AIDA facility located? How can we get a copy of the manual for our AIDA press? What is reverse tonnage? Visit our frequently answered questions section to find answers to your questions.
View F.A.Q.AIDA-Tech White Papers
Topics such as connections spacing, slide guiding systems, reverse tonnage and more, AIDA-Tech White papers offer information for a variety of technical subjects related to stamping presses and press operations.
View AIDA-Tech White PapersUser Testimonials
AIDA press users describe their companies and business operations, as well as, how they have used AIDA technology to achieve their production goals and expand their capacity and capabilities. Examples are provided from many different types of companies from job shops, to tier suppliers, to OEMs. Read on to see how leaders in many industries have successfully partnered with AIDA.
View User TestimonialsMetalforming Articles
We maintain a library of metalforming articles from a variety of industry publications covering a wide range of topics centered on stamping and press operations. Topics include press technology, market trends, and press applications. Many of the articles collected here have been authored by or contributed to by AIDA associates.
View Metalforming ArticlesEducational Partners
Not only does AIDA invest 5% of annual revenue towards internal research and development, but AIDA also actively seeks and participates in research with educational institutions such as the Center for Precision Forming (OSU), Institut für Umformtechnik, Edison Welding and others.
About Educational PartnersApplications Studies & Die Trials
Die trials provided by AIDA prove, in real-time with your own dies, how AIDA press technology can have multiple benefits to your stamping operations, including increased production rates, higher quality parts, reduced scrap, and reduced maintenance.
Applications Studies & Die TrialsStamping Press Technology
For over 100 years AIDA has been developing and manufacturing specialized metalforming products like metal stamping presses and related automation equipment, such as transfers, robots, and feeders. AIDA's exclusive stamping press technology is used throughout our wide range of presses, from 30 through 4,000 tons capacity.
Stamping Press TechnologyTerms & Glossary
A variety of functions may be performed by many different types of presses, depending upon the tooling. Typical press operations and other terms referring to press features and functions, as well as basic press characteristics and designs are explained in this section of our website.
View Terms & Glossary