Straightside Mechanical Press MCX Progressive Die & Transfer, From 315 - 1,250 Tons
Press Information
Press Information & Overview
Maximized Stamping Press Flexibility, Maximized Profits for Your Operations
The AIDA MCX, straightside tie-rod frame mechanical press manufactured in AIDA-America's 180,000 sq. ft. factory in Dayton, OH, is available from 315 through 1,250 tons capacity. Configurations include single or double eccentric gear drive, 1/4" and 1/2" rating points, a wide variety of stroke length and die height choices as well as zero clearance roller-type slide guides (with bronze oil film guides as an option).
The MCX, Mechanical stamping press, offers standard, medium, and high energy quill mounted flywheel options.
Press Features
AIDA MCX Mechanical Press Features
- Quill Mounted Flywheel
![Quill Mounted Flywheel]()
- Wide Connections Spacing
![Wide Spaced Connections for Better Load Distribution]()
- Ball Socket Connection Points
![Ball and Socket Connection Points]()
- Fastest acting HOLP in the industry (10 ms)
![AIDA Hydraulic Overload Protection System (HOLP)]()
- Roller Guides
![Roller Guides]()
- Highly Rigid Frame
![Highly Rigid Frame]()
8-Point Roller Type Slide Guide System
Zero-Clearance Guides and Lube Free Die Space(8) points of eccentric pin adjustment allow easy setting to maintain slide to bolster parallelism of less than .001"/ft
Allen-Bradley Based Access Control
For Mechanical Stamping PressesUser friendly design, large touch screen display enhances ease of operation. Allen-Bradley CompactLogix PLC with PILZ clutch brake safety controller.
Ball and Socket Connections
Improved Design When Compared to Wrist Pin ConnectionsEliminate one of the largest maintenance costs of a stamping press: the wrist pin slide connections. Designed to withstand the rigors of heavy stamping.
Eccentric Gear Drive
The Most Widely Used Drive System for Straightside Stamping PressesSlide motion provided by eccentric lobes that are part of the main drive gears. Gears are mounted on pins that run front to back in the press crown.
HOLP
Hydraulic Overload Protection SystemAIDA's press technology - the industry's fastest protection system. When overload occurs, oil evacuates 360 degrees around the ball seat with minimum oil flow resistance as compared to conventional systems
Quill Mounted Flywheel
Increases the Life of the Flywheel and Main Driveshaft BearingsThe flywheel is mounted on a quill that is attached to the press frame. The driveshaft passes through the quill and operates in an oil film bearing.
Highly Rigid Press Frame
Reduced Frame Deflection for Higher Precision Metal StampingFrame components are massive steel fabrications to reduce deflection. Welded steel construction. FEA modeled design.
Self-Contained Counterbalances
Low Maintenance System Improves PerformanceCylinder length provides additional volume, eliminating the need for surge tanks and related piping. Cylinder length is 5 times that of the press stroke
Wide Connections Spacing
Increased Off-Center Load Bearing CapacityReducing the negative effects of off-center loading and providing greater freedom in die design & layout.
Mechanical Press Control Features
- MCX Mechanical Press Control Features
- Allen-Bradley CompactLogix based control
- Large touch panel display for easy viewing and improved operability
- Crank angle indicator with digital display
- Pilz Safety PLC clutch/brake control
- Data bank for job storage
- Optional control platforms:
Mitsubishi PLC, Siemens S7 (CE Mark), Link, Wintriss
Press Specifications
MCX Mechanical Press Specifications
MCX-3150, 315 Ton, Single Reduction Mechanical Press Specifications
| MCX-3150 MODELS (Mechanical) | |||
| Press Technical Data | Unit | Single Reduction | |
| Capacity | kN | 3,150 | |
| U.S. ton | 347 | ||
| Full Stroke Length | mm | 250 or 300 | |
| in. | 9.8 or 11.8 | ||
| Rating Point | mm / SPM | 6.4 | |
| in. / SPM | 0.25 | ||
| Die Height Options (SDAU) | mm | 600, 650, 700 or 750 | |
| in. | 23.6, 25.6, 27.6 or 29.5 | ||
| Slide Adjustment | mm | 200 | |
| in. | 7.9 | ||
| Slide and Bolster Area | mm | 3050 x 1500 | |
| in. | 120.1 x 59.1 | ||
| Bolster Thickness | mm | 150 | |
| in. | 5.9 | ||
| Max Upper Die Weight | kg | 3,000 | |
| lb. | 6,600 | ||
| Side Window Opening | mm | 1100 | |
| in. | 43.3 | ||
| Floor to Top of Bolster | mm | 850 | |
| in. | 33.5 | ||
| Press Foot to Top of Bolster | mm | 1290 | |
| in. | 50.8 | ||
| Press Overall Height | mm | 6230 | |
| in. | 245 | ||
| Slide Deflection Rating | mm / mm | 1 / 8000 or 1 / 12000 (option) | |
| in. / ft. | .0015 or .0010 (option) | ||
| Bed Deflection Rating | mm / mm | 1 / 8000 or 1 / 12000 (option) | |
| in. / ft. | .0015 or .0010 (option) | ||
| Main Motor | Standard | kW / HP | 30 / 40 |
| Med. Energy | 45 / 60 | ||
| High Energy | 55 / 75 | ||
| Main Circuit Breaker(s), Average Full Load Amps | Standard | A; FLA | 100 A; 72 A FLA |
| Med. Energy | 125 A; 97 A FLA | ||
| High Energy | 150 A; 116 A FLA | ||
| Strokes per Minute | SPM | 20 to 60 | |
| Micro-inch Speed | SPM | 10 | |
| Standard Energy | kJ | 23 @ 30 SPM | |
| in-U.S. ton | 100 @ 30 SPM | ||
| Medium Energy | kJ | 36 @ 30 SPM | |
| in-U.S. ton | 160 @ 30 SPM | ||
| High Energy | kJ | 45 @ 30 SPM | |
| in-U.S. ton | 200 @ 30 SPM | ||
| Dimensions in inches are rounded to the nearest value. | |||
| Specifications subject to change without notice. | |||
MCX-3150, 315 Ton, Single Reduction, 1/2" Rating Mechanical Press Specifications
| MCX-3150 MODELS (MECHANICAL) | |||
| Press Technical Data | Unit | Single Reduction 1/2" Rating | |
| Capacity | kN | 3,150 | |
| U.S. ton | 347 | ||
| Full Stroke Length | mm | 250 or 300 | |
| in. | 9.8 or 11.8 | ||
| Rating Point | mm / SPM | 12.7 | |
| in. / SPM | 0.50 | ||
| Die Height Options (SDAU) | mm | 600, 650, 700 or 750 | |
| in. | 23.6, 25.6, 27.6 or 29.5 | ||
| Slide Adjustment | mm | 200 | |
| in. | 7.9 | ||
| Slide and Bolster Area | mm | 3050 x 1500 | |
| in. | 120.1 x 59.1 | ||
| Bolster Thickness | mm | 150 | |
| in. | 5.9 | ||
| Max Upper Die Weight | kg | 3,000 | |
| lb. | 6,600 | ||
| Side Window Opening | mm | 1100 | |
| in. | 43.3 | ||
| Floor to Top of Bolster | mm | 850 | |
| in. | 33.5 | ||
| Press Foot to Top of Bolster | mm | 1290 | |
| in. | 50.8 | ||
| Press Overall Height | mm | 6230 | |
| in. | 245 | ||
| Slide Deflection Rating | mm / mm | 1 / 8000 or 1 / 12000 (option) | |
| in. / ft. | .0015 or .0010 (option) | ||
| Bed Deflection Rating | mm / mm | 1 / 8000 or 1 / 12000 (option) | |
| in. / ft. | .0015 or .0010 (option) | ||
| Main Motor | Med. Energy | kW / HP | 45 / 60 |
| High Energy | 55 / 75 | ||
| Main Circuit Breaker(s), Average Full Load Amps | Standard | A; FLA | 100 A; 72 A FLA |
| Med. Energy | 125 A; 97 A FLA | ||
| High Energy | 150 A; 116 A FLA | ||
| Strokes per Minute | SPM | 20 to 60 | |
| Micro-inch Speed | SPM | 10 | |
| Medium Energy | kJ | 36 @ 30 SPM | |
| in-U.S. ton | 160 @ 30 SPM | ||
| High Energy | kJ | 45 @ 30 SPM | |
| in-U.S. ton | 200 @ 30 SPM | ||
| Dimensions in inches are rounded to the nearest value. | |||
| Specifications subject to change without notice. | |||
MCX-3150, 315 Ton, Double Reduction Rating Mechanical Press Specifications
| MCX-3150 MODELS (MECHANICAL) | |||
| Press Technical Data | Unit | Double Reduction | |
| Capacity | kN | 3,150 | |
| U.S. ton | 347 | ||
| Full Stroke Length | mm | 300 or 350 | |
| in. | 11.8 or 13.8 | ||
| Rating Point | mm / SPM | 12.7 | |
| in. / SPM | 0.50 | ||
| Die Height Options (SDAU) | mm | 600, 650, 700 or 750 | |
| in. | 23.6, 25.6, 27.6 or 29.5 | ||
| Slide Adjustment | mm | 200 | |
| in. | 7.9 | ||
| Slide and Bolster Area | mm | 3050 x 1500 | |
| in. | 120.1 x 59.1 | ||
| Bolster Thickness | mm | 150 | |
| in. | 5.9 | ||
| Max Upper Die Weight | kg | 3,000 | |
| lb. | 6,600 | ||
| Side Window Opening | mm | 1100 | |
| in. | 43.3 | ||
| Floor to Top of Bolster | mm | 850 | |
| in. | 33.5 | ||
| Press Foot to Top of Bolster | mm | 1290 | |
| in. | 50.8 | ||
| Press Overall Height | mm | 6230 | |
| in. | 245 | ||
| Slide Deflection Rating | mm / mm | 1 / 8000 or 1 / 12000 (option) | |
| in. / ft. | .0015 or .0010 (option) | ||
| Bed Deflection Rating | mm / mm | 1 / 8000 or 1 / 12000 (option) | |
| in. / ft. | .0015 or .0010 (option) | ||
| Main Motor | Med. Energy | kW / HP | 45 / 60 |
| High Energy | 55 / 75 | ||
| Main Circuit Breaker(s), Average Full Load Amps | Standard | A; FLA | 100 A; 72 A FLA |
| Med. Energy | 125 A; 97 A FLA | ||
| High Energy | 150 A; 116 A FLA | ||
| Strokes per Minute | SPM | 15 to 40 | |
| Micro-inch Speed | SPM | 10 | |
| Medium Energy | kJ | 38 @ 20 SPM | |
| in-U.S. ton | 170 @ 20 SPM | ||
| High Energy | kJ | 56 @ 20 SPM | |
| in-U.S. ton | 250 @ 20 SPM | ||
| Dimensions in inches are rounded to the nearest value. | |||
| Specifications subject to change without notice. | |||
MCX-4000, 400 Ton, Single Reduction Mechanical Press Specifications
| MCX-4000 MODELS (MECHANICAL) | |||||
| Press Technical Data | Unit | Single Reduction | |||
| Capacity | kN | 4,000 | |||
| U.S. ton | 440 | ||||
| Full Stroke Length | mm | 250, 300 or 350 | |||
| in. | 9.8, 11.8 or 13.8 | ||||
| Rating Point | mm / SPM | 6.4 | |||
| in. / SPM | 0.25 | ||||
| Die Height Options (SDAU) | mm | 600, 650, 700 or 750 (800, 850, 900 or 950) | |||
| in. | 23.6, 25.6, 27.6 or 29.5 (31.5, 33.5, 35.4 or 37.4) | ||||
| Slide Adjustment | mm | 250 | |||
| in. | 9.8 | ||||
| Slide and Bolster Area | mm | 3050 x 1500 or 3650 x 1500 | |||
| in. | 120.1 x 59.1 or 143.7 x 59.1 | ||||
| Bolster Thickness | mm | 175 | |||
| in. | 6.9 | ||||
| Max Upper Die Weight | kg | 4,000 | |||
| lb. | 8,800 | ||||
| Side Window Opening | mm | 1100 | |||
| in. | 43.3 | ||||
| Floor to Top of Bolster | mm | 850 | |||
| in. | 33.5 | ||||
| Press Foot to Top of Bolster | mm | 1575 | |||
| in. | 62.0 | ||||
| Press Overall Height | mm | 6870 | |||
| in. | 270 | ||||
| Slide Deflection Rating | mm / mm | 1 / 8000 or 1 / 12000 (option) | |||
| in. / ft. | .0015 or .0010 (option) | ||||
| Bed Deflection Rating | mm / mm | 1 / 8000 or 1 / 12000 (option) | |||
| in. / ft. | .0015 or .0010 (option) | ||||
| Main Motor | Standard | kW / HP | 45 / 60 | ||
| Med. Energy | 55 / 75 | ||||
| High Energy | 75 / 100 | ||||
| Main Circuit Breaker(s), Average Full Load Amps | Standard | A; FLA | 125 A; 97 A FLA | ||
| Med. Energy | 150 A; 116 A FLA | ||||
| High Energy | 200 A; 144 A FLA | ||||
| Strokes per Minute | SPM | 20 to 60 | |||
| Micro-inch Speed | SPM | 10 | |||
| Standard Energy | kJ | 37 @ 30 SPM | |||
| in-U.S. ton | 165 @ 30 SPM | ||||
| Medium Energy | kJ | 47 @ 30 SPM | |||
| in-U.S. ton | 210 @ 30 SPM | ||||
| High Energy | kJ | 63 @ 30 SPM | |||
| in-U.S. ton | 280 @ 30 SPM | ||||
| Dimensions in inches are rounded to the nearest value. | |||||
| Specifications in ( ) are for OPTIONAL Increased Stroke Length, Increased Die Height, or Wide Window models. | |||||
| Specifications subject to change without notice. | |||||
MCX-4000, 400 Ton, Single Reduction, 1/2" Rating Mechanical Press Specifications
| MCX-4000 MODELS(MECHANICAL) | |||||
| Press Technical Data | Unit | Single Reduction 1/2" Rating | |||
| Capacity | kN | 4,000 | |||
| U.S. ton | 440 | ||||
| Full Stroke Length | mm | 250, 300 or 350 | |||
| in. | 9.8, 11.8 or 13.8 | ||||
| Rating Point | mm / SPM | 12.7 | |||
| in. / SPM | 0.50 | ||||
| Die Height Options (SDAU) | mm | 600, 650, 700 or 750 (800, 850, 900 or 950) | |||
| in. | 23.6, 25.6, 27.6 or 29.5 (31.5, 33.5, 35.4 or 37.4) | ||||
| Slide Adjustment | mm | 250 | |||
| in. | 9.8 | ||||
| Slide and Bolster Area | mm | 3050 x 1500 or 3650 x 1500 | |||
| in. | 120.1 x 59.1 or 143.7 x 59.1 | ||||
| Bolster Thickness | mm | 175 | |||
| in. | 6.9 | ||||
| Max Upper Die Weight | kg | 4,000 | |||
| lb. | 8,800 | ||||
| Side Window Opening | mm | 1100 | |||
| in. | 43.3 | ||||
| Floor to Top of Bolster | mm | 850 | |||
| in. | 33.5 | ||||
| Press Foot to Top of Bolster | mm | 1575 | |||
| in. | 62.0 | ||||
| Press Overall Height | mm | 6870 | |||
| in. | 270 | ||||
| Slide Deflection Rating | mm / mm | 1 / 8000 or 1 / 12000 (option) | |||
| in. / ft. | .0015 or .0010 (option) | ||||
| Bed Deflection Rating | mm / mm | 1 / 8000 or 1 / 12000 (option) | |||
| in. / ft. | .0015 or .0010 (option) | ||||
| Main Motor | Med. Energy | kW / HP | 55 / 75 | ||
| High Energy | 75 / 100 | ||||
| Main Circuit Breaker(s), Average Full Load Amps | Standard | A; FLA | 125 A; 97 A FLA | ||
| Med. Energy | 150 A; 116 A FLA | ||||
| High Energy | 200 A; 144 A FLA | ||||
| Strokes per Minute | SPM | 20 to 60 | |||
| Micro-inch Speed | SPM | 10 | |||
| Medium Energy | kJ | 47 @ 30 SPM | |||
| in-U.S. ton | 210 @ 30 SPM | ||||
| High Energy | kJ | 63 @ 30 SPM | |||
| in-U.S. ton | 280 @ 30 SPM | ||||
| Dimensions in inches are rounded to the nearest value. | |||||
| Specifications in ( ) are for OPTIONAL Increased Stroke Length, Increased Die Height, or Wide Window models. | |||||
| Specifications subject to change without notice. | |||||
MCX-4000, 400 Ton, Double Reduction Rating Mechanical Press Specifications
| MCX-4000 MODELS (MECHANICAL) | |||||
| Press Technical Data | Unit | Double Reduction | |||
| Capacity | kN | 4,000 | |||
| U.S. ton | 440 | ||||
| Full Stroke Length | mm | 300, 350 or 400 | |||
| in. | 11.8, 13.8 or 15.7 | ||||
| Rating Point | mm / SPM | 12.7 | |||
| in. / SPM | 0.50 | ||||
| Die Height Options (SDAU) | mm | 600, 650, 700 or 750 (800, 850, 900 or 950) | |||
| in. | 23.6, 25.6, 27.6 or 29.5 (31.5, 33.5, 35.4 or 37.4) | ||||
| Slide Adjustment | mm | 250 | |||
| in. | 9.8 | ||||
| Slide and Bolster Area | mm | 3050 x 1500 or 3650 x 1500 | |||
| in. | 120.1 x 59.1 or 143.7 x 59.1 | ||||
| Bolster Thickness | mm | 175 | |||
| in. | 6.9 | ||||
| Max Upper Die Weight | kg | 4,000 | |||
| lb. | 8,800 | ||||
| Side Window Opening | mm | 1100 | |||
| in. | 43.3 | ||||
| Floor to Top of Bolster | mm | 850 | |||
| in. | 33.5 | ||||
| Press Foot to Top of Bolster | mm | 1575 | |||
| in. | 62.0 | ||||
| Press Overall Height | mm | 6870 | |||
| in. | 270 | ||||
| Slide Deflection Rating | mm / mm | 1 / 8000 or 1 / 12000 (option) | |||
| in. / ft. | .0015 or .0010 (option) | ||||
| Bed Deflection Rating | mm / mm | 1 / 8000 or 1 / 12000 (option) | |||
| in. / ft. | .0015 or .0010 (option) | ||||
| Main Motor | Med. Energy | kW / HP | 55 / 75 | ||
| High Energy | 75 / 100 | ||||
| Main Circuit Breaker(s), Average Full Load Amps | Standard | A; FLA | 125 A; 97 A FLA | ||
| Med. Energy | 150 A; 116 A FLA | ||||
| High Energy | 200 A; 144 A FLA | ||||
| Strokes per Minute | SPM | 15 to 35 | |||
| Micro-inch Speed | SPM | 10 | |||
| Medium Energy | kJ | 52 @ 15 SPM | |||
| in-U.S. ton | 230 @ 15 SPM | ||||
| High Energy | kJ | 79 @ 15 SPM | |||
| in-U.S. ton | 350 @ 15 SPM | ||||
| Dimensions in inches are rounded to the nearest value. | |||||
| Specifications in ( ) are for OPTIONAL Increased Stroke Length, Increased Die Height, or Wide Window models. | |||||
| Specifications subject to change without notice. | |||||
MCX-6300, 630 Ton, Single Reduction Mechanical Press Specifications
| MCX-6300 MODELS (MECHANICAL) | ||||||
| Press Technical Data | Unit | Single Reduction | ||||
| Capacity | kN | 6,300 | ||||
| U.S. ton | 693 | |||||
| Full Stroke Length | mm | 300 | 350 or 400 | |||
| in. | 11.8 | 13.8 or 15.7 | ||||
| Rating Point | mm/SPM | 6.4 | ||||
| in./SPM | 0.25 | |||||
| Die Height Options (SDAU) | mm | 700, 750, 800 or 850 (900, 950, 1000 or 1050) | ||||
| in. | 27.6, 29.5, 31.5 or 33.5 (35.4, 37.4, 39.4 or 41.3) | |||||
| Slide Adjustment | mm | 300 | ||||
| in. | 11.8 | |||||
| Slide and Bolster Area | mm | 3050 x 1500 or 3650 x 1500 or 4250 x 1500 | ||||
| in. | 120.1 x 59.1 or 143.7 x 59.1 or 167.3 x 59.1 | |||||
| Bolster Thickness | mm | 175 | ||||
| in. | 6.9 | |||||
| Max Upper Die Weight | kg | 6,000 (10,000) | ||||
| lb. | 13,200 (22,000) | |||||
| Side Window Opening | mm | 1250 (2100) | ||||
| in. | 49.2 (82.7) | |||||
| Floor to Top of Bolster | mm | 850 | ||||
| in. | 33.5 | |||||
| Press Foot to Top of Bolster | mm | 1825 | ||||
| in. | 71.9 | |||||
| Press Overall Height | mm | 7665 (8115) | ||||
| in. | 302 (320) | |||||
| Slide Deflection Rating | mm/mm | 1 / 8000 or 1 / 12000 (option) | ||||
| in./ft. | .0015 or .0010 (option) | |||||
| Bed Deflection Rating | mm/mm | 1 / 8000 or 1 / 12000 (option) | ||||
| in./ft. | .0015 or .0010 (option) | |||||
| Main Motor | Standard | kW/HP | 55 / 75 | |||
| Med. Energy | 75 / 100 | |||||
| High Energy | 90 / 125 | |||||
| Main Circuit Breaker(s), Average Full Load Amps | Standard | A; FLA | 150 A; 116 A FLA | |||
| Med. Energy | 200 A; 154 A FLA | |||||
| High Energy | 250 A; 188 A FLA | |||||
| Strokes per Minute | SPM | 20 to 60 | 20 to 50 | |||
| Micro-inch Speed | SPM | 10 | ||||
| Standard Energy | kJ | 47 @ 25 SPM | 54 @ 25 SPM | |||
| in-U.S. ton | 208 @ 25 SPM | 240 @ 25 SPM | ||||
| Medium Energy | kJ | 63 @ 25 SPM | 75 @ 25 SPM | |||
| in-U.S. ton | 280 @ 25 SPM | 330 @ 25 SPM | ||||
| High Energy | kJ | 80 @ 25 SPM | 95 @ 25 SPM | |||
| in-U.S. ton | 356 @ 25 SPM | 420 @ 25 SPM | ||||
| Dimensions in inches are rounded to the nearest value. | ||||||
| Specifications in ( ) are for OPTIONAL Increased Stroke Length, Increased Die Height, or Wide Window models. | ||||||
| Specifications subject to change without notice. | ||||||
MCX-6300, 630 Ton, Single Reduction, 1/2" Rating Mechanical Press Specifications
| MCX-6300 MODELS (MECHANICAL) | ||||||
| Press Technical Data | Unit | Single Reduction 1/2" Rating | ||||
| Capacity | kN | 6,300 | ||||
| U.S. ton | 693 | |||||
| Full Stroke Length | mm | 300, 350 or 400 | ||||
| in. | 11.8, 13.8 or 15.7 | |||||
| Rating Point | mm/SPM | 12.7 | ||||
| in./SPM | 0.50 | |||||
| Die Height Options (SDAU) | mm | 700, 750, 800 or 850 (900, 950, 1000 or 1050) | ||||
| in. | 27.6, 29.5, 31.5 or 33.5 (35.4, 37.4, 39.4 or 41.3) | |||||
| Slide Adjustment | mm | 300 | ||||
| in. | 11.8 | |||||
| Slide and Bolster Area | mm | 3050 x 1500 or 3650 x 1500 or 4250 x 1500 | ||||
| in. | 120.1 x 59.1 or 143.7 x 59.1 or 167.3 x 59.1 | |||||
| Bolster Thickness | mm | 175 | ||||
| in. | 6.9 | |||||
| Max Upper Die Weight | kg | 6,000 (10,000) | ||||
| lb. | 13,200 (22,000) | |||||
| Side Window Opening | mm | 1250 (2100) | ||||
| in. | 49.2 (82.7) | |||||
| Floor to Top of Bolster | mm | 850 | ||||
| in. | 33.5 | |||||
| Press Foot to Top of Bolster | mm | 1825 | ||||
| in. | 71.9 | |||||
| Press Overall Height | mm | 7665 (8115) | ||||
| in. | 302 (320) | |||||
| Slide Deflection Rating | mm/mm | 1 / 8000 or 1 / 12000 (option) | ||||
| in./ft. | .0015 or .0010 (option) | |||||
| Bed Deflection Rating | mm/mm | 1 / 8000 or 1 / 12000 (option) | ||||
| in./ft. | .0015 or .0010 (option) | |||||
| Main Motor | Med. Energy | kW/HP | 75 / 100 | |||
| High Energy | 90 / 125 | |||||
| Main Circuit Breaker(s), Average Full Load Amps | Standard | A; FLA | 150 A; 116 A FLA | |||
| Med. Energy | 200 A; 154 A FLA | |||||
| High Energy | 250 A; 188 A FLA | |||||
| Strokes per Minute | SPM | 20 to 50 | ||||
| Micro-inch Speed | SPM | 10 | ||||
| Medium Energy | kJ | 75 @ 25 SPM | ||||
| in-U.S. ton | 330 @ 25 SPM | |||||
| High Energy | kJ | 95 @ 25 SPM | ||||
| in-U.S. ton | 420 @ 25 SPM | |||||
| Dimensions in inches are rounded to the nearest value. | ||||||
| Specifications in ( ) are for OPTIONAL Increased Stroke Length, Increased Die Height, or Wide Window models. | ||||||
| Specifications subject to change without notice. | ||||||
MCX-6300, 630 Ton, Double Reduction Rating Mechanical Press Specifications
| MCX-6300 MODELS (MECHANICAL) | ||||||
| Press Technical Data | Unit | Double Reduction | ||||
| Capacity | kN | 6,300 | ||||
| U.S. ton | 693 | |||||
| Full Stroke Length | mm | 400 or 450 (500) | ||||
| in. | 15.7 or 17.7 (19.7) | |||||
| Rating Point | mm/SPM | 12.7 | ||||
| in./SPM | 0.50 | |||||
| Die Height Options (SDAU) | mm | 700, 750, 800 or 850 (900, 950, 1000 or 1050) | ||||
| in. | 27.6, 29.5, 31.5 or 33.5 (35.4, 37.4, 39.4 or 41.3) | |||||
| Slide Adjustment | mm | 300 | ||||
| in. | 11.8 | |||||
| Slide and Bolster Area | mm | 3050 x 1500 or 3650 x 1500 or 4250 x 1500 | ||||
| in. | 120.1 x 59.1 or 143.7 x 59.1 or 167.3 x 59.1 | |||||
| Bolster Thickness | mm | 175 | ||||
| in. | 6.9 | |||||
| Max Upper Die Weight | kg | 6,000 (10,000) | ||||
| lb. | 13,200 (22,000) | |||||
| Side Window Opening | mm | 1250 (2100) | ||||
| in. | 49.2 (82.7) | |||||
| Floor to Top of Bolster | mm | 850 | ||||
| in. | 33.5 | |||||
| Press Foot to Top of Bolster | mm | 1825 | ||||
| in. | 71.9 | |||||
| Press Overall Height | mm | 7665 (8115) | ||||
| in. | 302 (320) | |||||
| Slide Deflection Rating | mm/mm | 1 / 8000 or 1 / 12000 (option) | ||||
| in./ft. | .0015 or .0010 (option) | |||||
| Bed Deflection Rating | mm/mm | 1 / 8000 or 1 / 12000 (option) | ||||
| in./ft. | .0015 or .0010 (option) | |||||
| Main Motor | Med. Energy | kW/HP | 75 / 100 | |||
| High Energy | 90 / 125 | |||||
| Main Circuit Breaker(s), Average Full Load Amps | Standard | A; FLA | 150 A; 116 A FLA | |||
| Med. Energy | 200 A; 154 A FLA | |||||
| High Energy | 250 A; 188 A FLA | |||||
| Strokes per Minute | SPM | 10 to 30 | ||||
| Micro-inch Speed | SPM | 10 | ||||
| Medium Energy | kJ | 86 @ 15 SPM | ||||
| in-U.S. ton | 380 @ 15 SPM | |||||
| High Energy | kJ | 136 @ 15 SPM | ||||
| in-U.S. ton | 600 @ 15 SPM | |||||
| Dimensions in inches are rounded to the nearest value. | ||||||
| Specifications in ( ) are for OPTIONAL Increased Stroke Length, Increased Die Height, or Wide Window models. | ||||||
| Specifications subject to change without notice. | ||||||
MCX-8000, 800 Ton, Single Reduction Mechanical Press Specifications
| MCX-8000 MODELS (MECHANICAL) | |||
| Press Technical Data | Unit | Single Reduction | |
| Capacity | kN | 8,000 | |
| U.S. ton | 880 | ||
| Full Stroke Length | mm | 350 or 400 | |
| in. | 13.8 or 15.7 | ||
| Rating Point | mm / SPM | 6.4 | |
| in. / SPM | 0.25 | ||
| Die Height Options (SDAU) | mm | 750, 800, 850 or 900 | |
| in. | 29.5, 31.5, 33.5 or 35.4 | ||
| Slide Adjustment | mm | 300 | |
| in. | 11.8 | ||
| Slide and Bolster Area | mm | 3650 x 1800 or 4600 x 1800 | |
| in. | 143.7 x 70.9 or 181.1 x 70.9 | ||
| Bolster Thickness | mm | 235 | |
| in. | 9.3 | ||
| Max Upper Die Weight | kg | 10,000 | |
| lb. | 22,000 | ||
| Side Window Opening | mm | 1400 (2450) | |
| in. | 55.1 (96.5) | ||
| Floor to Top of Bolster | mm | 850 | |
| in. | 33.5 | ||
| Press Foot to Top of Bolster | mm | 2070 | |
| in. | 81.5 | ||
| Press Overall Height | mm | 9100 | |
| in. | 358 | ||
| Slide Deflection Rating | mm / mm | 1 / 8000 or 1 / 12000 (option) | |
| in. / ft. | .0015 or .0010 (option) | ||
| Bed Deflection Rating | mm / mm | 1 / 8000 or 1 / 12000 (option) | |
| in. / ft. | .0015 or .0010 (option) | ||
| Main Motor | Standard | kW / HP | 75 / 100 |
| Med. Energy | 90 / 125 | ||
| High Energy | 110 / 150 | ||
| Main Circuit Breaker(s), Average Full Load Amps | Standard | A; FLA | 200 A; 144 A FLA |
| Med. Energy | 225 A; 176 A FLA | ||
| High Energy | 225 A; 176 A FLA | ||
| Strokes per Minute | SPM | 20 to 50 | |
| Micro-inch Speed | SPM | 10 | |
| Standard Energy | kJ | 71 @ 20 SPM | |
| in-U.S. ton | 315 @ 20 SPM | ||
| Medium Energy | kJ | 88 @ 20 SPM | |
| in-U.S. ton | 390 @ 20 SPM | ||
| High Energy | kJ | 115 @ 20 SPM | |
| in-U.S. ton | 508 @ 20 SPM | ||
| Dimensions in inches are rounded to the nearest value. | |||
| Specifications in ( ) are for OPTIONAL Increased Stroke Length, Increased Die Height, or Wide Window models. | |||
| Specifications subject to change without notice. | |||
MCX-8000, 800 Ton, Single Reduction, 1/2" Rating Mechanical Press Specifications
| MCX-8000 MODELS (MECHANICAL) | |||
| Press Technical Data | Unit | Single Reduction 1/2" Rating | |
| Capacity | kN | 8,000 | |
| U.S. ton | 880 | ||
| Full Stroke Length | mm | 350 or 400 | |
| in. | 13.8 or 15.7 | ||
| Rating Point | mm / SPM | 12.7 | |
| in. / SPM | 0.50 | ||
| Die Height Options (SDAU) | mm | 750, 800, 850 or 900 | |
| in. | 29.5, 31.5, 33.5 or 35.4 | ||
| Slide Adjustment | mm | 300 | |
| in. | 11.8 | ||
| Slide and Bolster Area | mm | 3650 x 1800 or 4600 x 1800 | |
| in. | 143.7 x 70.9 or 181.1 x 70.9 | ||
| Bolster Thickness | mm | 235 | |
| in. | 9.3 | ||
| Max Upper Die Weight | kg | 10,000 | |
| lb. | 22,000 | ||
| Side Window Opening | mm | 1400 (2450) | |
| in. | 55.1 (96.5) | ||
| Floor to Top of Bolster | mm | 850 | |
| in. | 33.5 | ||
| Press Foot to Top of Bolster | mm | 2070 | |
| in. | 81.5 | ||
| Press Overall Height | mm | 9100 | |
| in. | 358 | ||
| Slide Deflection Rating | mm / mm | 1 / 8000 or 1 / 12000 (option) | |
| in. / ft. | .0015 or .0010 (option) | ||
| Bed Deflection Rating | mm / mm | 1 / 8000 or 1 / 12000 (option) | |
| in. / ft. | .0015 or .0010 (option) | ||
| Main Motor | Med. Energy | kW / HP | 90 / 125 |
| High Energy | 150 / 200 | ||
| Main Circuit Breaker(s), Average Full Load Amps | Med. Energy | A; FLA | 225 A; 176 A FLA |
| High Energy | 350 A; 280 A FLA | ||
| Strokes per Minute | SPM | 20 to 50 | |
| Micro-inch Speed | SPM | 10 | |
| Medium Energy | kJ | 88 @ 20 SPM | |
| in-U.S. ton | 390 @ 20 SPM | ||
| High Energy | kJ | 150 @ 20 SPM | |
| in-U.S. ton | 660 @ 20 SPM | ||
| Dimensions in inches are rounded to the nearest value. | |||
| Specifications in ( ) are for OPTIONAL Increased Stroke Length, Increased Die Height, or Wide Window models. | |||
| Specifications subject to change without notice. | |||
MCX-8000, 800 Ton, Double Reduction Rating Mechanical Press Specifications
| MCX-8000 MODELS (MECHANICAL) | |||
| Press Technical Data | Unit | Double Reduction 1/2" Rating | |
| Capacity | kN | 8,000 | |
| U.S. ton | 880 | ||
| Full Stroke Length | mm | 450 or 500 | |
| in. | 17.7 or 19.7 | ||
| Rating Point | mm / SPM | 12.7 | |
| in. / SPM | 0.50 | ||
| Die Height Options (SDAU) | mm | 750, 800, 850 or 900 | |
| in. | 29.5, 31.5, 33.5 or 35.4 | ||
| Slide Adjustment | mm | 300 | |
| in. | 11.8 | ||
| Slide and Bolster Area | mm | 3650 x 1800 or 4600 x 1800 | |
| in. | 143.7 x 70.9 or 181.1 x 70.9 | ||
| Bolster Thickness | mm | 235 | |
| in. | 9.3 | ||
| Max Upper Die Weight | kg | 10,000 | |
| lb. | 22,000 | ||
| Side Window Opening | mm | 1400 (2450) | |
| in. | 55.1 (96.5) | ||
| Floor to Top of Bolster | mm | 850 | |
| in. | 33.5 | ||
| Press Foot to Top of Bolster | mm | 2070 | |
| in. | 81.5 | ||
| Press Overall Height | mm | 9100 | |
| in. | 358 | ||
| Slide Deflection Rating | mm / mm | 1 / 8000 or 1 / 12000 (option) | |
| in. / ft. | .0015 or .0010 (option) | ||
| Bed Deflection Rating | mm / mm | 1 / 8000 or 1 / 12000 (option) | |
| in. / ft. | .0015 or .0010 (option) | ||
| Main Motor | Standard | kW / HP | 90 / 125 |
| Med. Energy | 110 / 150 | ||
| High Energy | 150 / 200 | ||
| Main Circuit Breaker(s), Average Full Load Amps | Standard | A; FLA | 225 A; 176 A FLA |
| Med. Energy | 250 A; 200 A FLA | ||
| High Energy | 350 A; 280 A FLA | ||
| Strokes per Minute | SPM | 12 to 30 | |
| Micro-inch Speed | SPM | 10 | |
| Standard Energy | kJ | 97 @ 12 SPM | |
| in-U.S. ton | 430 @ 12 SPM | ||
| Medium Energy | kJ | 122 @ 12 SPM | |
| in-U.S. ton | 540 @ 12 SPM | ||
| High Energy | kJ | 203 @ 12 SPM | |
| in-U.S. ton | 900 @ 12 SPM | ||
| Dimensions in inches are rounded to the nearest value. | |||
| Specifications in ( ) are for OPTIONAL Increased Stroke Length, Increased Die Height, or Wide Window models. | |||
| Specifications subject to change without notice. | |||
MCX-10000, 1,000 Ton, Single Reduction Mechanical Press Specifications
| MCX-10000 MODELS (MECHANICAL) | |||
| Press Technical Data | Unit | Single Reduction | |
| Capacity | kN | 10,000 | |
| U.S. ton | 1,100 | ||
| Full Stroke Length | mm | 350 or 400 | |
| in. | 13.8 or 15.7 | ||
| Rating Point | mm / SPM | 6.4 | |
| in. / SPM | 0.25 | ||
| Die Height Options (SDAU) | mm | 800, 850, 900 or 950 | |
| in. | 31.5, 33.5, 35.4 or 37.4 | ||
| Slide Adjustment | mm | 300 | |
| in. | 11.8 | ||
| Slide and Bolster Area | mm | 4600 x 1800 or 6100 x 1800 | |
| in. | 181.1 x 70.9 or 240.2 x 70.9 | ||
| Bolster Thickness | mm | 260 | |
| in. | 10.2 | ||
| Max Upper Die Weight | kg | 12,000 (15,000 for 6100 L-R) | |
| lb. | 26,400 (33,000 for 6100 L-R) | ||
| Side Window Opening | mm | 1750 (2450) | |
| in. | 68.9 (96.5) | ||
| Floor to Top of Bolster | mm | 850 | |
| in. | 33.5 | ||
| Press Foot to Top of Bolster | mm | 2230 | |
| in. | 87.8 | ||
| Press Overall Height | mm | 10700 | |
| in. | 421 | ||
| Slide Deflection Rating | mm / mm | 1 / 8000 or 1 / 12000 (option) | |
| in. / ft. | .0015 or .0010 (option) | ||
| Bed Deflection Rating | mm / mm | 1 / 8000 or 1 / 12000 (option) | |
| in. / ft. | .0015 or .0010 (option) | ||
| Main Motor | Standard | kW / HP | 110 / 150 |
| High Energy | 150 / 200 | ||
| Main Circuit Breaker(s), Average Full Load Amps | Standard | A; FLA | 225 A; 176 A FLA |
| High Energy | 250 A; 200 A FLA | ||
| Strokes per Minute | SPM | 20 to 50 | |
| Micro-inch Speed | SPM | 10 | |
| Standard Energy | kJ | 109 @ 20 SPM | |
| in-U.S. ton | 481 @ 20 SPM | ||
| High Energy | kJ | 141 @ 20 SPM | |
| in-U.S. ton | 622 @ 20 SPM | ||
| Dimensions in inches are rounded to the nearest value. | |||
| Specifications in ( ) are for OPTIONAL Increased Stroke Length, Increased Die Height, or Wide Window models. | |||
| Specifications subject to change without notice. | |||
MCX-10000, 1,000 Ton, Single Reduction, 1/2" Rating Mechanical Press Specifications
| MCX-10000 MODELS (MECHANICAL) | |||
| Press Technical Data | Unit | Single Reduction 1/2" Rating | |
| Capacity | kN | 10,000 | |
| U.S. ton | 1,100 | ||
| Full Stroke Length | mm | 350 or 400 | |
| in. | 13.8 or 15.7 | ||
| Rating Point | mm / SPM | 12.7 | |
| in. / SPM | 0.50 | ||
| Die Height Options (SDAU) | mm | 800, 850, 900 or 950 | |
| in. | 31.5, 33.5, 35.4 or 37.4 | ||
| Slide Adjustment | mm | 300 | |
| in. | 11.8 | ||
| Slide and Bolster Area | mm | 4600 x 1800 or 6100 x 1800 | |
| in. | 181.1 x 70.9 or 240.2 x 70.9 | ||
| Bolster Thickness | mm | 260 | |
| in. | 10.2 | ||
| Max Upper Die Weight | kg | 12,000 (15,000 for 6100 L-R) | |
| lb. | 26,400 (33,000 for 6100 L-R) | ||
| Side Window Opening | mm | 1750 (2450) | |
| in. | 68.9 (96.5) | ||
| Floor to Top of Bolster | mm | 850 | |
| in. | 33.5 | ||
| Press Foot to Top of Bolster | mm | 2230 | |
| in. | 87.8 | ||
| Press Overall Height | mm | 10700 | |
| in. | 421 | ||
| Slide Deflection Rating | mm / mm | 1 / 8000 or 1 / 12000 (option) | |
| in. / ft. | .0015 or .0010 (option) | ||
| Bed Deflection Rating | mm / mm | 1 / 8000 or 1 / 12000 (option) | |
| in. / ft. | .0015 or .0010 (option) | ||
| Main Motor | Standard | kW / HP | 150 / 200 |
| High Energy | 188 / 250 | ||
| Main Circuit Breaker(s), Average Full Load Amps | Standard | A; FLA | 250 A; 200 A FLA |
| High Energy | 350 A; 280 A FLA | ||
| Strokes per Minute | SPM | 20 to 50 | |
| Micro-inch Speed | SPM | 10 | |
| Standard Energy | kJ | 141 @ 20 SPM | |
| in-U.S. ton | 622 @ 20 SPM | ||
| High Energy | kJ | 186 @ 23 SPM | |
| in-U.S. ton | 823 @ 23 SPM | ||
| Dimensions in inches are rounded to the nearest value. | |||
| Specifications in ( ) are for OPTIONAL Increased Stroke Length, Increased Die Height, or Wide Window models. | |||
| Specifications subject to change without notice. | |||
MCX-10000, 1,000 Ton, Double Reduction Rating Mechanical Press Specifications
| MCX-10000 MODELS (MECHANICAL) | |||
| Press Technical Data | Unit | Double Reduction | |
| Capacity | kN | 10,000 | |
| U.S. ton | 1,100 | ||
| Full Stroke Length | mm | 400, 500 or 600 | |
| in. | 15.7, 19.7 or 23.6 | ||
| Rating Point | mm / SPM | 12.7 | |
| in. / SPM | 0.50 | ||
| Die Height Options (SDAU) | mm | 800, 850, 900 or 950 | |
| in. | 31.5, 33.5, 35.4 or 37.4 | ||
| Slide Adjustment | mm | 300 | |
| in. | 11.8 | ||
| Slide and Bolster Area | mm | 4600 x 1800 or 6100 x 1800 | |
| in. | 181.1 x 70.9 or 240.2 x 70.9 | ||
| Bolster Thickness | mm | 260 | |
| in. | 10.2 | ||
| Max Upper Die Weight | kg | 12,000 (15,000 for 6100 L-R) | |
| lb. | 26,400 (33,000 for 6100 L-R) | ||
| Side Window Opening | mm | 1750 (2450) | |
| in. | 68.9 (96.5) | ||
| Floor to Top of Bolster | mm | 850 | |
| in. | 33.5 | ||
| Press Foot to Top of Bolster | mm | 2230 | |
| in. | 87.8 | ||
| Press Overall Height | mm | 10700 | |
| in. | 421 | ||
| Slide Deflection Rating | mm / mm | 1 / 8000 or 1 / 12000 (option) | |
| in. / ft. | .0015 or .0010 (option) | ||
| Bed Deflection Rating | mm / mm | 1 / 8000 or 1 / 12000 (option) | |
| in. / ft. | .0015 or .0010 (option) | ||
| Main Motor | Standard | kW / HP | 110 / 150 |
| High Energy | 150 / 200 | ||
| Main Circuit Breaker(s), Average Full Load Amps | Standard | A; FLA | 250 A; 200 A FLA |
| High Energy | 350 A; 280 A FLA | ||
| Strokes per Minute | SPM | 15 to 30 | |
| Micro-inch Speed | SPM | 10 | |
| Standard Energy | kJ | 183 @ 15 SPM | |
| in-U.S. ton | 810 @ 15 SPM | ||
| High Energy | kJ | 250 @ 15 SPM | |
| in-U.S. ton | 1100 @ 15 SPM | ||
| Dimensions in inches are rounded to the nearest value. | |||
| Specifications in ( ) are for OPTIONAL Increased Stroke Length, Increased Die Height, or Wide Window models. | |||
| Specifications subject to change without notice. | |||
MCX-12500, 1,250 Ton, Single Reduction Rating Mechanical Press Specifications
| MCX-12500 MODELS (MECHANICAL) | |||
| Press Technical Data | Unit | Single Reduction | |
| Capacity | kN | 12,500 | |
| U.S. ton | 1,375 | ||
| Full Stroke Length | mm | 400 | |
| in. | 15.7 | ||
| Rating Point | mm / SPM | 6.4 | |
| in. / SPM | 0.25 | ||
| Die Height Options (SDAU) | mm | 800, 850, 900 or 950 | |
| in. | 31.5, 33.5, 35.4 or 37.4 | ||
| Slide Adjustment | mm | 300 | |
| in. | 11.8 | ||
| Slide and Bolster Area | mm | 4250 x 1800 or 4850 x 1800 or 6100 x 1800 | |
| in. | 167.3 x 70.9 or 190.9 x 70.9 or 240.2 x 70.9 | ||
| Bolster Thickness | mm | 260 | |
| in. | 10.2 | ||
| Max Upper Die Weight | kg | 12,000 (15,000 for 6100 L-R) | |
| lb. | 26,400 (33,000 for 6100 L-R) | ||
| Side Window Opening | mm | 1750 (2450) | |
| in. | 68.9 (96.5) | ||
| Floor to Top of Bolster | mm | 850 | |
| in. | 33.5 | ||
| Press Foot to Top of Bolster | mm | 2200 | |
| in. | 86.6 | ||
| Press Overall Height | mm | 10500 | |
| in. | 413 | ||
| Slide Deflection Rating | mm / mm | 1 / 8000 or 1 / 12000 (option) | |
| in. / ft. | .0015 or .0010 (option) | ||
| Bed Deflection Rating | mm / mm | 1 / 8000 or 1 / 12000 (option) | |
| in. / ft. | .0015 or .0010 (option) | ||
| Main Motor | Standard | kW / HP | 110 / 150 |
| High Energy | 150 / 200 | ||
| Main Circuit Breaker(s), Average Full Load Amps | Standard | A; FLA | 250 A; 200 A FLA |
| High Energy | 350 A; 280 A FLA | ||
| Strokes per Minute | SPM | 20 to 45 | |
| Micro-inch Speed | SPM | 10 | |
| Standard Energy | kJ | 102 @ 20 SPM | |
| in-U.S. ton | 450 @ 20 SPM | ||
| High Energy | kJ | 137 @ 20 SPM | |
| in-U.S. ton | 606 @ 20 SPM | ||
| Dimensions in inches are rounded to the nearest value. | |||
| Specifications in ( ) are for OPTIONAL Increased Stroke Length, Increased Die Height, or Wide Window models. | |||
| Specifications subject to change without notice. | |||
MCX-12500, 1,250 Ton, Double Reduction Rating Mechanical Press Specifications
| MCX-12500 MODELS (MECHANICAL) | |||
| Press Technical Data | Unit | Double Reduction | |
| Capacity | kN | 12,500 | |
| U.S. ton | 1,375 | ||
| Full Stroke Length | mm | 400, 500 or 600 | |
| in. | 15.7, 19.7 or 23.6 | ||
| Rating Point | mm / SPM | 12.7 | |
| in. / SPM | 0.50 | ||
| Die Height Options (SDAU) | mm | 800, 850, 900 or 950 | |
| in. | 31.5, 33.5, 35.4 or 37.4 | ||
| Slide Adjustment | mm | 300 | |
| in. | 11.8 | ||
| Slide and Bolster Area | mm | 4850 x 1800 or 6100 x 1800 | |
| in. | 190.9 x 70.9 or 240.2 x 70.9 | ||
| Bolster Thickness | mm | 260 | |
| in. | 10.2 | ||
| Max Upper Die Weight | kg | 12,000 (15,000 for 6100 L-R) | |
| lb. | 26,400 (33,000 for 6100 L-R) | ||
| Side Window Opening | mm | 1750 (2450) | |
| in. | 68.9 (96.5) | ||
| Floor to Top of Bolster | mm | 850 | |
| in. | 33.5 | ||
| Press Foot to Top of Bolster | mm | 2200 | |
| in. | 86.6 | ||
| Press Overall Height | mm | 10700 | |
| in. | 421 | ||
| Slide Deflection Rating | mm / mm | 1 / 8000 or 1 / 12000 (option) | |
| in. / ft. | .0015 or .0010 (option) | ||
| Bed Deflection Rating | mm / mm | 1 / 8000 or 1 / 12000 (option) | |
| in. / ft. | .0015 or .0010 (option) | ||
| Main Motor | Standard | kW / HP | 110 / 150 |
| High Energy | 150 / 200 | ||
| Main Circuit Breaker(s), Average Full Load Amps | Standard | A; FLA | 250 A; 200 A FLA |
| High Energy | 350 A; 280 A FLA | ||
| Strokes per Minute | SPM | 15 to 30 | |
| Micro-inch Speed | SPM | 10 | |
| Standard Energy | kJ | 183 @ 15 SPM | |
| in-U.S. ton | 810 @ 15 SPM | ||
| High Energy | kJ | 250 @ 15 SPM | |
| in-U.S. ton | 1100 @ 15 SPM | ||
| Dimensions in inches are rounded to the nearest value. | |||
| Specifications in ( ) are for OPTIONAL Increased Stroke Length, Increased Die Height, or Wide Window models. | |||
| Specifications subject to change without notice. | |||
MCX-3150, 315 Ton Mechanical Press Specifications
| MCX-3150 MODELS (MECHANICAL) | |||||
| Press Technical Data | Unit | Single Reduction | Single Reduction 1/2" Rating | Double Reduction | |
| Capacity | kN | 3,150 | |||
| U.S. ton | 347 | ||||
| Full Stroke Length | mm | 250 or 300 | 250 or 300 | 300 or 350 | |
| in. | 9.8 or 11.8 | 9.8 or 11.8 | 11.8 or 13.8 | ||
| Rating Point | mm / SPM | 6.4 | 12.7 | 12.7 | |
| in. / SPM | 0.25 | 0.50 | 0.50 | ||
| Die Height Options (SDAU) | mm | 600, 650, 700 or 750 | |||
| in. | 23.6, 25.6, 27.6 or 29.5 | ||||
| Slide Adjustment | mm | 200 | |||
| in. | 7.9 | ||||
| Slide and Bolster Area | mm | 3050 x 1500 | |||
| in. | 120.1 x 59.1 | ||||
| Bolster Thickness | mm | 150 | |||
| in. | 5.9 | ||||
| Max Upper Die Weight | kg | 3,000 | |||
| lb. | 6,600 | ||||
| Side Window Opening | mm | 1100 | |||
| in. | 43.3 | ||||
| Floor to Top of Bolster | mm | 850 | |||
| in. | 33.5 | ||||
| Press Foot to Top of Bolster | mm | 1290 | |||
| in. | 50.8 | ||||
| Press Overall Height | mm | 6230 | |||
| in. | 245 | ||||
| Slide Deflection Rating | mm / mm | 1 / 8000 or 1 / 12000 (option) | |||
| in. / ft. | .0015 or .0010 (option) | ||||
| Bed Deflection Rating | mm / mm | 1 / 8000 or 1 / 12000 (option) | |||
| in. / ft. | .0015 or .0010 (option) | ||||
| Main Motor | Standard | kW / HP | 30 / 40 | N/A | |
| Med. Energy | 45 / 60 | ||||
| High Energy | 55 / 75 | ||||
| Main Circuit Breaker(s), Average Full Load Amps | Standard | A; FLA | 100 A; 72 A FLA | ||
| Med. Energy | 125 A; 97 A FLA | ||||
| High Energy | 150 A; 116 A FLA | ||||
| Strokes per Minute | SPM | 20 to 60 | 20 to 60 | 15 to 40 | |
| Micro-inch Speed | SPM | 10 | |||
| Standard Energy | kJ | 23 @ 30 SPM | N/A | ||
| in-U.S. ton | 100 @ 30 SPM | ||||
| Medium Energy | kJ | 36 @ 30 SPM | 36 @ 30 SPM | 38 @ 20 SPM | |
| in-U.S. ton | 160 @ 30 SPM | 160 @ 30 SPM | 170 @ 30 SPM | ||
| High Energy | kJ | 45 @ 30 SPM | 45 @ 30 SPM | 56 @ 20 SPM | |
| in-U.S. ton | 200 @ 30 SPM | 200 @ 30 SPM | 250 @ 20 SPM | ||
| Dimensions in inches are rounded to the nearest value. | |||||
| Specifications subject to change without notice. | |||||
MCX-4000, 400 Ton Mechanical Press Specifications
| MCX-4000 MODELS (MECHANICAL) | |||||
| Press Technical Data | Unit | Single Reduction | Single Reduction 1/2" Rating | Double Reduction | |
| Capacity | kN | 4,000 | |||
| U.S. ton | 440 | ||||
| Full Stroke Length | mm | 250, 300 or 350 | 250, 300 or 350 | 300, 350 or 400 | |
| in. | 9.8, 11.8 or 13.8 | 9.8, 11.8 or 13.8 | 11.8, 13.8 or 15.7 | ||
| Rating Point | mm / SPM | 6.4 | 12.7 | 12.7 | |
| in. / SPM | 0.25 | 0.50 | 0.50 | ||
| Die Height Options (SDAU) | mm | 600, 650, 700 or 750 (800, 850, 900 or 950) | |||
| in. | 23.6, 25.6, 27.6 or 29.5 (31.5, 33.5, 35.4 or 37.4) | ||||
| Slide Adjustment | mm | 250 | |||
| in. | 9.8 | ||||
| Slide and Bolster Area | mm | 3050 x 1500 or 3650 x 1500 | |||
| in. | 120.1 x 59.1 or 143.7 x 59.1 | ||||
| Bolster Thickness | mm | 175 | |||
| in. | 6.9 | ||||
| Max Upper Die Weight | kg | 4,000 | |||
| lb. | 8,800 | ||||
| Side Window Opening | mm | 1100 | |||
| in. | 43.3 | ||||
| Floor to Top of Bolster | mm | 850 | |||
| in. | 33.5 | ||||
| Press Foot to Top of Bolster | mm | 1575 | |||
| in. | 62.0 | ||||
| Press Overall Height | mm | 6870 | |||
| in. | 270 | ||||
| Slide Deflection Rating | mm / mm | 1 / 8000 or 1 / 12000 (option) | |||
| in. / ft. | .0015 or .0010 (option) | ||||
| Bed Deflection Rating | mm / mm | 1 / 8000 or 1 / 12000 (option) | |||
| in. / ft. | .0015 or .0010 (option) | ||||
| Main Motor | Standard | kW / HP | 45 / 60 | N/A | |
| Med. Energy | 55 / 75 | ||||
| High Energy | 75 / 100 | ||||
| Main Circuit Breaker(s), Average Full Load Amps | Standard | A; FLA | 125 A; 97 A FLA | ||
| Med. Energy | 150 A; 116 A FLA | ||||
| High Energy | 200 A; 144 A FLA | ||||
| Strokes per Minute | SPM | 20 to 60 | 20 to 60 | 15 to 35 | |
| Micro-inch Speed | SPM | 10 | |||
| Standard Energy | kJ | 37 @ 30 SPM | N/A | ||
| in-U.S. ton | 165 @ 30 SPM | ||||
| Medium Energy | kJ | 47 @ 30 SPM | 47 @ 30 SPM | 52 @ 15 SPM | |
| in-U.S. ton | 210 @ 30 SPM | 210 @ 30 SPM | 230 @ 15 SPM | ||
| High Energy | kJ | 63 @ 30 SPM | 63 @ 30 SPM | 79 @ 15 SPM | |
| in-U.S. ton | 280 @ 30 SPM | 280 @ 30 SPM | 350 @ 15 SPM | ||
| Dimensions in inches are rounded to the nearest value. | |||||
| Specifications in ( ) are for OPTIONAL Increased Stroke Length, Increased Die Height, or Wide Window models. | |||||
| Specifications subject to change without notice. | |||||
MCX-6300, 630 Ton Mechanical Press Specifications
| MCX-6300 MODELS (MECHANICAL) | ||||||
| Press Technical Data | Unit | Single Reduction | Single Reduction 1/2" Rating | Double Reduction | ||
| Capacity | kN | 6,300 | ||||
| U.S. ton | 693 | |||||
| Full Stroke Length | mm | 300 | 350 or 400 | 300, 350 or 400 | 400 or 450 (500) | |
| in. | 11.8 | 13.8 or 15.7 | 11.8, 13.8 or 15.7 | 15.7 or 17.7 (19.7) | ||
| Rating Point | mm/SPM | 6.4 | 12.7 | 12.7 | ||
| in./SPM | 0.25 | 0.50 | 0.50 | |||
| Die Height Options (SDAU) | mm | 700, 750, 800 or 850 (900, 950, 1000 or 1050) | ||||
| in. | 27.6, 29.5, 31.5 or 33.5 (35.4, 37.4, 39.4 or 41.3) | |||||
| Slide Adjustment | mm | 300 | ||||
| in. | 11.8 | |||||
| Slide and Bolster Area | mm | 3050 x 1500 or 3650 x 1500 or 4250 x 1500 | ||||
| in. | 120.1 x 59.1 or 143.7 x 59.1 or 167.3 x 59.1 | |||||
| Bolster Thickness | mm | 175 | ||||
| in. | 6.9 | |||||
| Max Upper Die Weight | kg | 6,000 (10,000) | ||||
| lb. | 13,200 (22,000) | |||||
| Side Window Opening | mm | 1250 (2100) | ||||
| in. | 49.2 (82.7) | |||||
| Floor to Top of Bolster | mm | 850 | ||||
| in. | 33.5 | |||||
| Press Foot to Top of Bolster | mm | 1825 | ||||
| in. | 71.9 | |||||
| Press Overall Height | mm | 7665 (8115) | ||||
| in. | 302 (320) | |||||
| Slide Deflection Rating | mm/mm | 1 / 8000 or 1 / 12000 (option) | ||||
| in./ft. | .0015 or .0010 (option) | |||||
| Bed Deflection Rating | mm/mm | 1 / 8000 or 1 / 12000 (option) | ||||
| in./ft. | .0015 or .0010 (option) | |||||
| Main Motor | Standard | kW/HP | 55 / 75 | N/A | ||
| Med. Energy | 75 / 100 | |||||
| High Energy | 90 / 125 | |||||
| Main Circuit Breaker(s), Average Full Load Amps | Standard | A; FLA | 150 A; 116 A FLA | |||
| Med. Energy | 200 A; 154 A FLA | |||||
| High Energy | 250 A; 188 A FLA | |||||
| Strokes per Minute | SPM | 20 to 60 | 20 to 50 | 20 to 50 | 10 to 30 | |
| Micro-inch Speed | SPM | 10 | ||||
| Standard Energy | kJ | 47 @ 25 SPM | 54 @ 25 SPM | N/A | ||
| in-U.S. ton | 208 @ 25 SPM | 240 @ 25 SPM | ||||
| Medium Energy | kJ | 63 @ 25 SPM | 75 @ 25 SPM | 75 @ 25 SPM | 86 @ 15 SPM | |
| in-U.S. ton | 280 @ 25 SPM | 330 @ 25 SPM | 330 @ 25 SPM | 380 @ 15 SPM | ||
| High Energy | kJ | 80 @ 25 SPM | 95 @ 25 SPM | 95 @ 25 SPM | 136 @ 15 SPM | |
| in-U.S. ton | 356 @ 25 SPM | 420 @ 25 SPM | 420 @ 25 SPM | 600 @ 15 SPM | ||
| Dimensions in inches are rounded to the nearest value. | ||||||
| Specifications in ( ) are for OPTIONAL Increased Stroke Length, Increased Die Height, or Wide Window models. | ||||||
| Specifications subject to change without notice. | ||||||
MCX-8000, 800 Ton Mechanical Press Specifications
| MCX-8000 MODELS (MECHANICAL) | |||||
| Press Technical Data | Unit | Single Reduction | Single Reduction 1/2" Rating | Double Reduction 1/2" Rating | |
| Capacity | kN | 8,000 | |||
| U.S. ton | 880 | ||||
| Full Stroke Length | mm | 350 or 400 | 350 or 400 | 450 or 500 | |
| in. | 13.8 or 15.7 | 13.8 or 15.7 | 17.7 or 19.7 | ||
| Rating Point | mm / SPM | 6.4 | 12.7 | ||
| in. / SPM | 0.25 | 0.50 | |||
| Die Height Options (SDAU) | mm | 750, 800, 850 or 900 | |||
| in. | 29.5, 31.5, 33.5 or 35.4 | ||||
| Slide Adjustment | mm | 300 | |||
| in. | 11.8 | ||||
| Slide and Bolster Area | mm | 3650 x 1800 or 4600 x 1800 | |||
| in. | 143.7 x 70.9 or 181.1 x 70.9 | ||||
| Bolster Thickness | mm | 235 | |||
| in. | 9.3 | ||||
| Max Upper Die Weight | kg | 10,000 | |||
| lb. | 22,000 | ||||
| Side Window Opening | mm | 1400 (2450) | |||
| in. | 55.1 (96.5) | ||||
| Floor to Top of Bolster | mm | 850 | |||
| in. | 33.5 | ||||
| Press Foot to Top of Bolster | mm | 2070 | |||
| in. | 81.5 | ||||
| Press Overall Height | mm | 9100 | |||
| in. | 358 | ||||
| Slide Deflection Rating | mm / mm | 1 / 8000 or 1 / 12000 (option) | |||
| in. / ft. | .0015 or .0010 (option) | ||||
| Bed Deflection Rating | mm / mm | 1 / 8000 or 1 / 12000 (option) | |||
| in. / ft. | .0015 or .0010 (option) | ||||
| Main Motor | Standard | kW / HP | 75 / 100 | N/A | 90 / 125 |
| Med. Energy | 90 / 125 | 110 / 150 | |||
| High Energy | 110 / 150 | 150 / 200 | |||
| Main Circuit Breaker(s), Average Full Load Amps | Standard | A; FLA | 200 A; 144 A FLA | N/A | 225 A; 176 A FLA |
| Med. Energy | 225 A; 176 A FLA | 250 A; 200 A FLA | |||
| High Energy | 225 A; 176 A FLA | 350 A; 280 A FLA | |||
| Strokes per Minute | SPM | 20 to 50 | 20 to 50 | 12 to 30 | |
| Micro-inch Speed | SPM | 10 | |||
| Standard Energy | kJ | 71 @ 20 SPM | N/A | 97 @ 12 SPM | |
| in-U.S. ton | 315 @ 20 SPM | 430 @ 12 SPM | |||
| Medium Energy | kJ | 88 @ 20 SPM | 88 @ 20 SPM | 122 @ 12 SPM | |
| in-U.S. ton | 390 @ 20 SPM | 390 @ 20 SPM | 540 @ 12 SPM | ||
| High Energy | kJ | 115 @ 20 SPM | 150 @ 20 SPM | 203 @ 12 SPM | |
| in-U.S. ton | 508 @ 20 SPM | 660 @ 20 SPM | 900 @ 12 SPM | ||
| Dimensions in inches are rounded to the nearest value. | |||||
| Specifications in ( ) are for OPTIONAL Increased Stroke Length, Increased Die Height, or Wide Window models. | |||||
| Specifications subject to change without notice. | |||||
MCX-10000, 1,000 Ton Mechanical Press Specifications
| MCX-10000 MODELS (MECHANICAL) | |||||
| Press Technical Data | Unit | Single Reduction | Single Reduction 1/2" Rating | Double Reduction 1/2" Rating | |
| Capacity | kN | 10,000 | |||
| U.S. ton | 1,100 | ||||
| Full Stroke Length | mm | 350 or 400 | 350 or 400 | 400, 500 or 600 | |
| in. | 13.8 or 15.7 | 13.8 or 15.7 | 15.7, 19.7 or 23.6 | ||
| Rating Point | mm / SPM | 6.4 | 12.7 | 12.7 | |
| in. / SPM | 0.25 | 0.50 | 0.50 | ||
| Die Height Options (SDAU) | mm | 800, 850, 900 or 950 | |||
| in. | 31.5, 33.5, 35.4 or 37.4 | ||||
| Slide Adjustment | mm | 300 | |||
| in. | 11.8 | ||||
| Slide and Bolster Area | mm | 4600 x 1800 or 6100 x 1800 | |||
| in. | 181.1 x 70.9 or 240.2 x 70.9 | ||||
| Bolster Thickness | mm | 260 | |||
| in. | 10.2 | ||||
| Max Upper Die Weight | kg | 12,000 (15,000 for 6100 L-R) | |||
| lb. | 26,400 (33,000 for 6100 L-R) | ||||
| Side Window Opening | mm | 1750 (2450) | |||
| in. | 68.9 (96.5) | ||||
| Floor to Top of Bolster | mm | 850 | |||
| in. | 33.5 | ||||
| Press Foot to Top of Bolster | mm | 2230 | |||
| in. | 87.8 | ||||
| Press Overall Height | mm | 10700 | |||
| in. | 421 | ||||
| Slide Deflection Rating | mm / mm | 1 / 8000 or 1 / 12000 (option) | |||
| in. / ft. | .0015 or .0010 (option) | ||||
| Bed Deflection Rating | mm / mm | 1 / 8000 or 1 / 12000 (option) | |||
| in. / ft. | .0015 or .0010 (option) | ||||
| Main Motor | Standard | kW / HP | 110 / 150 | 150 / 200 | 110 / 150 |
| High Energy | 150 / 200 | 188 / 250 | 150 / 200 | ||
| Main Circuit Breaker(s), Average Full Load Amps | Standard | A; FLA | 225 A; 176 A FLA | 250 A; 200 A FLA | |
| High Energy | 250 A; 200 A FLA | 350 A; 280 A FLA | |||
| Strokes per Minute | SPM | 20 to 50 | 15 to 30 | ||
| Micro-inch Speed | SPM | 10 | |||
| Standard Energy | kJ | 109 @ 20 SPM | 141 @ 20 SPM | 183 @ 15 SPM | |
| in-U.S. ton | 481 @ 20 SPM | 622 @ 20 SPM | 810 @ 15 SPM | ||
| High Energy | kJ | 141 @ 20 SPM | 186 @ 23 SPM | 250 @ 15 SPM | |
| in-U.S. ton | 622 @ 20 SPM | 823 @ 23 SPM | 1100 @ 15 SPM | ||
| Dimensions in inches are rounded to the nearest value. | |||||
| Specifications in ( ) are for OPTIONAL Increased Stroke Length, Increased Die Height, or Wide Window models. | |||||
| Specifications subject to change without notice. | |||||
MCX-12500, 1,250 Ton Mechanical Press Specifications
| MCX-12500 MODELS (MECHANICAL) | ||||
| Press Technical Data | Unit | Single Reduction | Double Reduction | |
| Capacity | kN | 12,500 | ||
| U.S. ton | 1,375 | |||
| Full Stroke Length | mm | 400 | 400, 500 or 600 | |
| in. | 15.7 | 15.7, 19.7 or 23.6 | ||
| Rating Point | mm / SPM | 6.4 | 12.7 | |
| in. / SPM | 0.25 | 0.50 | ||
| Die Height Options (SDAU) | mm | 800, 850, 900 or 950 | ||
| in. | 31.5, 33.5, 35.4 or 37.4 | |||
| Slide Adjustment | mm | 300 | ||
| in. | 11.8 | |||
| Slide and Bolster Area | mm | 4250 x 1800 or 4850 x 1800 or 6100 x 1800 | 4850 x 1800 or 6100 x 1800 | |
| in. | 167.3 x 70.9 or 190.9 x 70.9 or 240.2 x 70.9 | 190.9 x 70.9 or 240.2 x 70.9 | ||
| Bolster Thickness | mm | 260 | ||
| in. | 10.2 | |||
| Max Upper Die Weight | kg | 12,000 (15,000 for 6100 L-R) | ||
| lb. | 26,400 (33,000 for 6100 L-R) | |||
| Side Window Opening | mm | 1750 (2450) | ||
| in. | 68.9 (96.5) | |||
| Floor to Top of Bolster | mm | 850 | ||
| in. | 33.5 | |||
| Press Foot to Top of Bolster | mm | 2200 | ||
| in. | 86.6 | |||
| Press Overall Height | mm | 10500 | 10700 | |
| in. | 413 | 421 | ||
| Slide Deflection Rating | mm / mm | 1 / 8000 or 1 / 12000 (option) | ||
| in. / ft. | .0015 or .0010 (option) | |||
| Bed Deflection Rating | mm / mm | 1 / 8000 or 1 / 12000 (option) | ||
| in. / ft. | .0015 or .0010 (option) | |||
| Main Motor | Standard | kW / HP | 110 / 150 | |
| High Energy | 150 / 200 | |||
| Main Circuit Breaker(s), Average Full Load Amps | Standard | A; FLA | 250 A; 200 A FLA | |
| High Energy | 350 A; 280 A FLA | |||
| Strokes per Minute | SPM | 20 to 45 | 15 to 30 | |
| Micro-inch Speed | SPM | 10 | ||
| Standard Energy | kJ | 102 @ 20 SPM | 183 @ 15 SPM | |
| in-U.S. ton | 450 @ 20 SPM | 810 @ 15 SPM | ||
| High Energy | kJ | 137 @ 20 SPM | 250 @ 15 SPM | |
| in-U.S. ton | 606 @ 20 SPM | 1,100 @ 15 SPM | ||
| Dimensions in inches are rounded to the nearest value. | ||||
| Specifications in ( ) are for OPTIONAL Increased Stroke Length, Increased Die Height, or Wide Window models. | ||||
| Specifications subject to change without notice. | ||||
Technical Resources
Frequently Asked Questions
Answers to Your Questions about AIDA and Press Related Topics We offer answers for all types of common questions - whether technical in nature or as simple as where to look for career opportunities. Examples of some questions are: What is HOLP? Where is the closest AIDA facility located? How can we get a copy of the manual for our AIDA press? What is reverse tonnage? Visit our frequently answered questions section to find answers to your questions.
View Frequently Asked QuestionsAIDA-Tech White Papers
Technical Topics & Information Topics such as connections spacing, slide guiding systems, reverse tonnage and more, AIDA-Tech White papers offer information for a variety of technical subjects related to stamping presses and press operations.
View AIDA-Tech White PapersMetalforming Articles
Articles from Industry Publications We maintain a library of metalforming articles from a variety of industry publications covering a wide range of topics centered on stamping and press operations. Topics include press technology, market trends, and press applications. Many of the articles collected here have been authored by or contributed to by AIDA associates.
View Metalforming ArticlesAIDA Press User Testimonials
Case Studies from Stampers AIDA press users describe their companies and business operations, as well as, how they have used AIDA technology to achieve their production goals and expand their capacity and capabilities. Examples are provided from many different types of companies from job shops, to tier suppliers, to OEMs. Read on to see how leaders in many industries have successfully partnered with AIDA.
View User TestimonialsApplications Studies & Die Trials
Schedule an Application Review or Die Trial, Today Application studies and die trials provided by AIDA prove, with your own dies and part drawings, how AIDA stamping press technology can have multiple benefits to your manufacturing operations, including increased production rates, higher quality parts, reduced scrap, and reduced maintenance.
Applications Studies & Die TrialsStamping Press Technology
Industry Leading Forming Systems For over 100 years AIDA has been developing and manufacturing specialized metalforming products like metal stamping presses and related automation equipment, such as transfers, robots, and feeders. AIDA's exclusive stamping press technology is used throughout our wide range of presses, from 30 through 4,000 tons capacity.
Stamping Press TechnologyEducational Partners & Resources
Research and Development Not only does AIDA invest 5% of annual revenue towards internal research and development, but AIDA also actively seeks and participates in research with educational institutions such as the Center for Precision Forming (OSU), Institut für Umformtechnik, Edison Welding and others.
More About Educational PartnersTerms & Glossary
Operations, Components, & Press Industry Terminology A variety of functions may be performed by many different types of presses, depending upon the tooling. Typical press operations and other terms referring to press features and functions, as well as basic press characteristics and designs are explained in this section of our website.
View Terms & Glossary