Cold Forging Press FMX From 400 - 1,200 Tons

FMX Cold Forging Transfer Press Link Motion Cold Forging Press, FMX

Press Information

Press Information & Overview

Link Motion Cold Forging Press, FMX Overview AIDA FMX Link Motion Cold Forging Press

AIDA developed the FMX Series of Cold Forging Presses in response to demand from industrial sectors - particularly the automotive industry. Cold forging forming processes enable the high-accuracy, high-efficiency forming of parts for a wide variety of uses with a wide variety of shapes. High-quality parts begin with high-accuracy forming. AIDA will continue to incorporate customer requirements into its forming technologies, and will continue to strive to contribute to their even greater success. The wide-ranging high functionality that is provided by the AIDA FMX Cold Forging Press enables high-efficiency operation and high-quality forming.

Request More Information

Press Features

AIDA FMX Link Motion Cold Forging Press Features

  • 2-point design increases resistance to off-center loading and improves accuracy
  • Link motion is used to extend forming boundaries and improve product accuracy
  • Hydraulic overload protection system protects dies
  • Compact frame design
  • Minimum total clearance reduces vibration and increase die life
  • Independent micro-inching drive reduces setup time for die trials
  • 8-surface slide guides extend working stroke and enhance safety
  • Optimized operator panel
  • Knock-out timing button reduces setup time and enhances safety
  • Large side and front openings easily accommodate automation and improve workability and safety
Request More Information

Press Specifications

FMX Link Motion Cold Forging Press Specifications

400 Ton630 Ton
800 Ton1000 Ton
1,200 Ton
400 - 800 Ton1,000 - 1,200 Ton

FMX-4000, 400 Ton Link Motion Cold Forging Press Specifications

FMX-400 MODELS
Press Technical DataUnitFMX-400
CapacitykN4000
U.S. Ton450
Stroke Lengthmm300400
in.11.8115.75
Strokes per minutespm25~4020~30
Die Heightmm600900
in.23.6235.43
Slide Area (LR x FB)mm900x1000900x1000
in.35.43x39.3735.43x39.37
Bolster Area (LR x FB)mm900x1000900x1000
in.35.43x39.3735.43x39.37
Rated tonnage pointmm1313
in.11.8115.75
Bed Knockout capacitykN-240/100,240,100
U.S. Ton27/11,27,11
Number of stages-3
400 Ton Press Specifications Back to Specifications List

FMX-6300, 630 Ton Link Motion Cold Forging Press Specifications

FMX-630 MODELS
Press Technical DataUnitFMX-630
CapacitykN6300
U.S. Ton710
Stroke Lengthmm300400
in.11.8115.75
Strokes per minutespm20~3015~25
Die Heightmm6501000
in.25.5939.37
Slide Area (LR x FB)mm1100x10001100x1000
in.43.31x39.3743.31x39.37
Bolster Area (LR x FB)mm1100x10001100x1000
in.43.31x39.3743.31x39.37
Rated tonnage pointmm1313
in.11.8115.75
Bed Knockout capacitykN-300/120,300,120
U.S. Ton34/13,34,13
Number of stages-3
630 Ton Press Specifications Back to Specifications List

FMX-8000, 800 Ton Link Motion Cold Forging Press Specifications

FMX-800 MODELS
Press Technical DataUnitFMX-800
CapacitykN8000
U.S. Ton900
Stroke Lengthmm300400
in.11.8115.75
Strokes per minutespm15~3015~25
Die Heightmm6501000
in.25.5939.37
Slide Area (LR x FB)mm1200x10001200x1000
in.47.24x39.3747.24x39.37
Bolster Area (LR x FB)mm1200x10001200x1000
in.47.24x39.3747.24x39.37
Rated tonnage pointmm1313
in.11.8115.75
Bed Knockout capacitykN-500/200,500,200
U.S. Ton56/22,56,22
Number of stages-3
800 Ton Press Specifications Back to Specifications List

FMX-1000, 1,000 Ton Link Motion Cold Forging Press Specifications

FMX-1000 MODELS
Press Technical DataUnitFMX-1000
CapacitykN10000
U.S. Ton1120
Stroke Lengthmm300400
in.11.8115.75
Strokes per minutespm15~3015~25
Die Heightmm7001000
in.27.5639.37
Slide Area (LR x FB)mm1200x10001200x1000
in.47.24x39.3747.24x39.37
Bolster Area (LR x FB)mm1200x10001200x1000
in.47.24x39.3747.24x39.37
Rated tonnage pointmm1313
in.11.8115.75
Bed Knockout capacitykN-500/200,500,200
U.S. Ton56/22,56,22
Number of stages-3
1,000 Ton Press Specifications Back to Specifications List

FMX-12000, 1,200 Ton Link Motion Cold Forging Press Specifications

FMX-1200 MODELS
Press Technical DataUnitFMX-1200
CapacitykN12000
U.S. Ton1350
Stroke Lengthmm300400
in.11.8115.75
Strokes per minutespm15~3015~25
Die Heightmm6501100
in.25.5943.31
Slide Area (LR x FB)mm1300x12001250x1000
in.51.18x47.2449.21x39.37
Bolster Area (LR x FB)mm1300x12001250x1000
in.51.18x47.2449.21x39.37
Rated tonnage pointmm1313
in.11.8115.75
Bed Knockout capacitykN-600/240,600,240
U.S. Ton67/27,67,27
Number of stages-3
1,200 Ton Press Specifications Back to Specifications List

FMX, 400 - 800 Ton Link Motion Cold Forging Press Specifications

FMX MODELS
Press Technical DataUnitFMX-400FMX-630FMX-800
CapacitykN400063008000
U.S. Ton450710900
Stroke Lengthmm300400300400300400
in.11.8115.7511.8115.7511.8115.75
Strokes per minutespm25~4020~3020~3015~2515~3015~25
Die Heightmm60090065010006501000
in.23.6235.4325.5939.3725.5939.37
Slide Area (LR x FB)mm900x1000900x10001100x10001100x10001200x10001200x1000
in.35.43x39.3735.43x39.3743.31x39.3743.31x39.3747.24x39.3747.24x39.37
Bolster Area (LR x FB)mm900x1000900x10001100x10001100x10001200x10001200x1000
in.35.43x39.3735.43x39.3743.31x39.3743.31x39.3747.24x39.3747.24x39.37
Rated tonnage pointmm131313131313
in.11.8115.7511.8115.7511.8115.75
Bed Knockout capacitykN-240/100,240,100-300/120,300,120-500/200,500,200
U.S. Ton27/11,27,1134/13,34,1356/22,56,22
Number of stages-3-3-3
400 - 800 Ton Press Specifications Back to Specifications List

FMX, 1,000 - 1,200 Ton Link Motion Cold Forging Press Specifications

FMX MODELS
Press Technical DataUnitFMX-1000FMX-1200
CapacitykN1000012000
U.S. Ton11201350
Stroke Lengthmm300400300400
in.11.8115.7511.8115.75
Strokes per minutespm15~3015~2515~3015~25
Die Heightmm70010006501100
in.27.5639.3725.5943.31
Slide Area (LR x FB)mm1200x10001200x10001300x12001250x1000
in.47.24x39.3747.24x39.3751.18x47.2449.21x39.37
Bolster Area (LR x FB)mm1200x10001200x10001300x12001250x1000
in.47.24x39.3747.24x39.3751.18x47.2449.21x39.37
Rated tonnage pointmm13131313
in.11.8115.7511.8115.75
Bed Knockout capacitykN-500/200,500,200-600/240,600,240
U.S. Ton56/22,56,2267/27,67,27
Number of stages-3-3
1,000 - 1,200 Ton Press Specifications Back to Specifications List

Technical Resources

Frequently Asked Questions

Frequently Asked Questions
  • What is HOLP
  • Gap Frame Mechanical Press Tandem Lines
  • Wet-Type Clutch and Brake
  • NC Press Frame Design
  • Ball Cup versus Wrist Pin Design

We offer answers for all types of common questions - whether technical in nature or as simple as where to look for career opportunities. Examples of some questions are: What is HOLP? Where is closest AIDA facility located? How can we get a copy of the manual for our AIDA press? What is reverse tonnage? Visit our frequently answered questions section to find answers to your questions.

View F.A.Q.

AIDA-Tech White Papers

AIDA-Tech White Papers

Topics such as connections spacing, slide guiding systems, reverse tonnage and more, AIDA-Tech White papers offer information for a variety of technical subjects related to stamping presses and press operations.

View AIDA-Tech White Papers

User Testimonials

AIDA Press User Testimonials

AIDA press users describe their companies and business operations, as well as, how they have used AIDA technology to achieve their production goals and expand their capacity and capabilities. Examples are provided from many different types of companies from job shops, to tier suppliers, to OEMs. Read on to see how leaders in many industries have successfully partnered with AIDA.

View User Testimonials

Metalforming Articles

Metalforming Technology and Industry Articles

We maintain a library of metalforming articles from a variety of industry publications covering a wide range of topics centered on stamping and press operations. Topics include press technology, market trends, and press applications. Many of the articles collected here have been authored by or contributed to by AIDA associates.

View Metalforming Articles

Educational Partners

Educational Partners and Resources

Not only does AIDA invest 5% of annual revenue towards internal research and development, but AIDA also actively seeks and participates in research with educational institutions such as the Center for Precision Forming (OSU), Institut für Umformtechnik, Edison Welding and others.

About Educational Partners

Applications Studies & Die Trials

Stamping die detail photo

Die trials provided by AIDA prove, in real-time with your own dies, how AIDA press technology can have multiple benefits to your stamping operations, including increased production rates, higher quality parts, reduced scrap, and reduced maintenance.

Applications Studies & Die Trials

Stamping Press Technology

Multiple Press Plant Layout Illustration

For over 100 years AIDA has been developing and manufacturing specialized metalforming products such as presses and related auxiliary equipment, such as transfers, robots, and feeders. AIDA's exclusive stamping press technology is used throughout our wide range of presses, from 30 through 4,000 tons capacity.

Stamping Press Technology

Terms & Glossary

Stamping and Metalforming Industry Terms and Glossary

A variety of functions may be performed by many different types of presses, depending upon the tooling. Typical press operations and other terms referring to press features and functions, as well as basic press characteristics and designs are explained in this section of our website.

View Terms & Glossary

Contact AIDA

Comments / Area of Interest:
* Required Field
>