Unitized Frame Mechanical Press NS1 Single Point, From 80 - 200 Tons

NS1-2000 Tandem Line 200 Ton Mechanical Unitized Frame Presses NS1-2000 Tandem Line, 200 Ton Mechanical Unitized Frame Presses

Press Information

Press Information & Overview

Single-Point Unitized Frame Stamping Presses AIDA N1-1100
  • Highly rigid frame
  • Fast acting HOLP system (10 msec)
  • AIDA Wet clutch and Brake
  • 6-Point full length Bronze Gibs
  • Brake stop-time monitoring display
  • Automatic lubrication system for Gibs and Crankshaft Bearings
  • AIDA MPC/SVC safety controller
  • Quill mounted flywheel with a flywheel brake
  • AC variable frequency drive

AIDA NS1 unitized frame mechanical presses are available from 80 through 200 tons capacity. The six-point slide guide system provides a long useful life. The wet-type clutch and brake provide higher intermittent rates and long life - important factors for hand-fed and top-stop applications.

An AC Variable frequency drive allows for wider speed ranges. The Quill mounted flywheel results in a larger bearing surface. The front to back mounted forged steel crankshaft along with hardened and precision ground gears are well suited for high stress blanking applications. Micro-Inching provides die setting at very low speeds. Additionally, an extensive spare parts inventory in Dayton, OH ensures continuous product support.

With nearly 7,000 AIDA servo and mechanical presses and forming system equipment installations in North America, it is easy to see that AIDA presses are an industry standard.

Request More Information

Press Features

AIDA NS1 Unitized Frame Press Features

AIDA NS Unitized Frame Mechanical Press Cutaway Graphic
  1. Ball and Socket Connections AIDA Ball Type Connections
  2. Hydraulic Overload Protection System (HOLP) AIDA Hydraulic Overload Protection System (HOLP)
  3. Recirculating Lubrication System Recirculating Lubrication System for Stamping Presses
  4. AIDA Wet Clutch and Brake AIDA Wet Clutch and Brake
  5. Hardened & ground pinion and ground main gear AIDA ground main gear
  6. Quill Mounted Flywheel AIDA Wet Type Clutch and Brake
  • Additional Features & Benefits
  • Installation and service support by AIDA factory trained technicians
  • Highly rigid frame
  • Flywheel brake
  • Counterbalance lube pump
  • Air blow-off with solenoid valve
  • ASME certified air tanks
  • Full length 6-point slide guides
Request More Information

Press Specifications

NS1 Mechanical Unitized Frame Press Specifications

80 Ton110 Ton
150 Ton200 Ton
Specifications PDF
80 - 200 TonSpecifications PDF

NS1-800, 80 Ton Mechanical Unitized Frame Press Specifications

NS1 MODELS
Press Technical DataUnitNS1-800
(S) (1)
Nominal CapacitykN800
U.S. ton88
Rating Pointmm3.25.0
in.0.130.20
Stroke Lengthmm60100
in.2.363.94
Strokes per Minute (No Load)spm75~15055~125
Die Heightmm300
in.11.81
Slide Adjustment Rangemm80
in.3.15
Slide Area (LR x FB)mm700 x 460
in.27.56 x 18.11
Bolster Area (LR x FB)mm900 x 460
in.35.43 x 18.11
Side Opening (from top of bolster)mm440 x 220
in.17.32 x 8.66
Bolster Thicknessmm140
in.5.51
Maximum Upper Die Weightkg300
lbs.660
Main Motor (Variable)kW7.5
HP10
Required Air PressureMpa0.5
psi73
80 Ton Press Specifications Back to Specifications List

NS1-1100, 110 Ton Mechanical Unitized Frame Press Specifications

NS1 MODELS
Press Technical DataUnitNS1-1100
(S)(1)
Nominal CapacitykN1100
U.S. ton121
Rating Pointmm3.25.0
in.0.130.20
Stroke Lengthmm70110
in.2.764.33
Strokes per Minute (No Load)spm65~13550~110
Die Heightmm320
in.12.60
Slide Adjustment Rangemm90
in.3.54
Slide Area (LR x FB)mm800 x 520
in.31.50 x 20.47
Bolster Area (LR x FB)mm1000 x 520
in.39.40 x 20.50
Side Opening (from top of bolster)mm500 x 240
in.19.68 x 9.45
Bolster Thicknessmm155
in.6.10
Maximum Upper Die Weightkg350
lbs.770
Main Motor (Variable)kW11
HP15
Required Air PressureMpa0.5
psi73
110 Ton Press Specifications Back to Specifications List

NS1-1500, 150 Ton Mechanical Unitized Frame Press Specifications

NS1 MODELS
Press Technical DataUnitNS1-1500
(S)(1)
Nominal CapacitykN1500
U.S. ton165
Rating Pointmm4.06.0
in.0.160.24
Stroke Lengthmm80130
in.3.155.12
Strokes per Minute (No Load)spm55~11540~95
Die Heightmm350
in.13.78
Slide Adjustment Rangemm100
in.3.94
Slide Area (LR x FB)mm900 x 580
in.35.43 x 22.83
Bolster Area (LR x FB)mm1150 x 600
in.45.28 x 23.62
Side Opening (from top of bolster)mm560 X 280
in.22.05 X 11.02
Bolster Thicknessmm165
in.6.50
Maximum Upper Die Weightkg500
lbs.1100
Main Motor (Variable)kW11
HP15
Required Air PressureMpa0.5
psi73
150 Ton Press Specifications Back to Specifications List

NS1-2000, 200 Ton Mechanical Unitized Frame Press Specifications

NS1 MODELS
Press Technical DataUnitNS1-2000
(S)(1)
Nominal CapacitykN2000
U.S. ton220
Rating Pointmm4.06.0
in.0.160.24
Stroke Lengthmm95160
in.3.746.30
Strokes per Minute (No Load)spm45~9535~80
Die Heightmm410
in.16.14
Slide Adjustment Rangemm110
in.4.33
Slide Area (LR x FB)mm1000 x 650
in.39.37 x 25.59
Bolster Area (LR x FB)mm1250 x 680
in.49.21 x 26.77
Side Opening (from top of bolster)mm620 X 330
in.24.41 X 12.99
Bolster Thicknessmm180
in.7.10
Maximum Upper Die Weightkg1000
lbs.2204
Main Motor (Variable)kW15
HP20
Required Air PressureMpa0.5
psi73
200 Ton Press Specifications Back to Specifications List

NS1, 80 - 200 Ton Mechanical Unitized Frame Press Specifications

NS1 MODELS
Press Technical DataUnitNS1-800NS1-1100NS1-1500NS1-2000
(S) (1)(S)(1)(S)(1)(S)(1)
Nominal CapacitykN800110015002000
U.S. ton88121165220
Rating Pointmm3.25.03.25.04.06.04.06.0
in.0.130.200.130.200.160.240.160.24
Stroke Lengthmm60100701108013095160
in.2.363.942.764.333.155.123.746.30
Strokes per Minute (No Load)spm75~15055~12565~13550~11055~11540~9545~9535~80
Die Heightmm300320350410
in.11.8112.6013.7816.14
Slide Adjustment Rangemm8090100110
in.3.153.543.944.33
Slide Area (LR x FB)mm700 x 460800 x 520900 x 5801000 x 650
in.27.56 x 18.1131.50 x 20.4735.43 x 22.8339.37 x 25.59
Bolster Area (LR x FB)mm900 x 4601000 x 5201150 x 6001250 x 680
in.35.43 x 18.1139.40 x 20.5045.28 x 23.6249.21 x 26.77
Side Opening (from top of bolster)mm440 x 220500 x 240560 X 280620 X 330
in.17.32 x 8.6619.68 x 9.4522.05 X 11.0224.41 X 12.99
Bolster Thicknessmm140155165180
in.5.516.106.507.10
Maximum Upper Die Weightkg3003505001000
lbs.66077011002204
Main Motor (Variable)kW7.5111115
HP10151520
Required Air PressureMpa0.50.50.50.5
psi73737373
80 - 300 Ton Press Specifications Back to Specifications List

Technical Resources

Frequently Asked Questions

Frequently Asked Questions
  • What is HOLP
  • Gap Frame Mechanical Press Tandem Lines
  • Wet-Type Clutch and Brake
  • NC Press Frame Design
  • Ball Cup versus Wrist Pin Design

We offer answers for all types of common questions - whether technical in nature or as simple as where to look for career opportunities. Examples of some questions are: What is HOLP? Where is closest AIDA facility located? How can we get a copy of the manual for our AIDA press? What is reverse tonnage? Visit our frequently answered questions section to find answers to your questions.

View F.A.Q.

AIDA-Tech White Papers

AIDA-Tech White Papers

Topics such as connections spacing, slide guiding systems, reverse tonnage and more, AIDA-Tech White papers offer information for a variety of technical subjects related to stamping presses and press operations.

View AIDA-Tech White Papers

User Testimonials

AIDA Press User Testimonials

AIDA press users describe their companies and business operations, as well as, how they have used AIDA technology to achieve their production goals and expand their capacity and capabilities. Examples are provided from many different types of companies from job shops, to tier suppliers, to OEMs. Read on to see how leaders in many industries have successfully partnered with AIDA.

View User Testimonials

Metalforming Articles

Metalforming Technology and Industry Articles

We maintain a library of metalforming articles from a variety of industry publications covering a wide range of topics centered on stamping and press operations. Topics include press technology, market trends, and press applications. Many of the articles collected here have been authored by or contributed to by AIDA associates.

View Metalforming Articles

Educational Partners

Educational Partners and Resources

Not only does AIDA invest 5% of annual revenue towards internal research and development, but AIDA also actively seeks and participates in research with educational institutions such as the Center for Precision Forming (OSU), Institut für Umformtechnik, Edison Welding and others.

About Educational Partners

Applications Studies & Die Trials

Stamping die detail photo

Die trials provided by AIDA prove, in real-time with your own dies, how AIDA press technology can have multiple benefits to your stamping operations, including increased production rates, higher quality parts, reduced scrap, and reduced maintenance.

Applications Studies & Die Trials

Stamping Press Technology

Multiple Press Plant Layout Illustration

For over 100 years AIDA has been developing and manufacturing specialized metalforming products such as presses and related auxiliary equipment, such as transfers, robots, and feeders. AIDA's exclusive stamping press technology is used throughout our wide range of presses, from 30 through 4,000 tons capacity.

Stamping Press Technology

Terms & Glossary

Stamping and Metalforming Industry Terms and Glossary

A variety of functions may be performed by many different types of presses, depending upon the tooling. Typical press operations and other terms referring to press features and functions, as well as basic press characteristics and designs are explained in this section of our website.

View Terms & Glossary

Contact AIDA

Comments / Area of Interest:
* Required Field
>